.TH CPUPOWER\-SET "1" "22/02/2011" "" "cpupower Manual" .SH NAME cpupower\-set \- Set processor power related kernel or hardware configurations .SH SYNOPSIS .ft B .B cpupower set [ \-b VAL ] .SH DESCRIPTION \fBcpupower set \fP sets kernel configurations or directly accesses hardware registers affecting processor power saving policies. Some options are platform wide, some affect single cores. By default values are applied on all cores. How to modify single core configurations is described in the cpupower(1) manpage in the \-\-cpu option section. Whether an option affects the whole system or can be applied to individual cores is described in the Options sections. Use \fBcpupower info \fP to read out current settings and whether they are supported on the system at all. .SH Options .PP \-\-perf-bias, \-b .RS 4 Sets a register on supported Intel processore which allows software to convey its policy for the relative importance of performance versus energy savings to the processor. The range of valid numbers is 0-15, where 0 is maximum performance and 15 is maximum energy efficiency. The processor uses this information in model-specific ways when it must select trade-offs between performance and energy efficiency. This policy hint does not supersede Processor Performance states (P-states) or CPU Idle power states (C-states), but allows software to have influence where it would otherwise be unable to express a preference. For example, this setting may tell the hardware how aggressively or conservatively to control frequency in the "turbo range" above the explicitly OS-controlled P-state frequency range. It may also tell the hardware how aggressively it should enter the OS requested C-states. This option can be applied to individual cores only via the \-\-cpu option, cpupower(1). Setting the performance bias value on one CPU can modify the setting on related CPUs as well (for example all CPUs on one socket), because of hardware restrictions. Use \fBcpupower -c all info -b\fP to verify. This options needs the msr kernel driver (CONFIG_X86_MSR) loaded. .RE .SH "SEE ALSO" cpupower-info(1), cpupower-monitor(1), powertop(1) .PP .SH AUTHORS .nf \-\-perf\-bias parts written by Len Brown Thomas Renninger >
diff options
context:
space:
mode:
authorColin Ian King <colin.king@canonical.com>2017-01-11 15:36:20 +0000
committerMark Brown <broonie@kernel.org>2017-01-18 16:32:44 +0000
commitb98acbff9a05b371c5f0ca6e44a3af8ce9274379 (patch)
treed6835885f859a456e62ce93621041138d6a54f9b /drivers/usb/image
parentd00b74613fb18dfd0a5aa99270ee2e72d5c808d7 (diff)
regulator: twl6030: fix range comparison, allowing vsel = 59
The range min_uV > 1350000 && min_uV <= 150000 is never reachable because of a typo in the previous range check and hence vsel = 59 is never reached. Fix the previous range check to enable the vsel = 59 setting. Fixes CoverityScan CID#728454 ("Logially dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/usb/image')