#!/bin/bash
#
# This test runs on Intel x86 based hardware which support the intel_pstate
# driver. The test checks the frequency settings from the maximum turbo
# state to the minimum supported frequency, in decrements of 100MHz. The
# test runs the aperf.c program to put load on each processor.
#
# The results are displayed in a table which indicate the "Target" state,
# or the requested frequency in MHz, the Actual frequency, as read from
# /proc/cpuinfo, the difference between the Target and Actual frequencies,
# and the value of MSR 0x199 (MSR_IA32_PERF_CTL) which indicates what
# pstate the cpu is in, and the value of
# /sys/devices/system/cpu/intel_pstate/max_perf_pct X maximum turbo state
#
# Notes: In some cases several frequency values may be placed in the
# /tmp/result.X files. This is done on purpose in order to catch cases
# where the pstate driver may not be working at all. There is the case
# where, for example, several "similar" frequencies are in the file:
#
#
#/tmp/result.3100:1:cpu MHz : 2899.980
#/tmp/result.3100:2:cpu MHz : 2900.000
#/tmp/result.3100:3:msr 0x199: 0x1e00
#/tmp/result.3100:4:max_perf_pct 94
#
# and the test will error out in those cases. The result.X file can be checked
# for consistency and modified to remove the extra MHz values. The result.X
# files can be re-evaluated by setting EVALUATE_ONLY to 1 below.
EVALUATE_ONLY=0
max_cpus=$(($(nproc)-1))
# compile programs
gcc aperf.c -Wall -D_GNU_SOURCE -o aperf -lm
[ $? -ne 0 ] && echo "Problem compiling aperf.c." && exit 1
gcc -o msr msr.c -lm
[ $? -ne 0 ] && echo "Problem compiling msr.c." && exit 1
function run_test () {
file_ext=$1
for cpu in `seq 0 $max_cpus`
do
echo "launching aperf load on $cpu"
./aperf $cpu &
done
echo "sleeping for 5 seconds"
sleep 5
num_freqs=$(cat /proc/cpuinfo | grep MHz | sort -u | wc -l)
if [ $num_freqs -le 2 ]; then
cat /proc/cpuinfo | grep MHz | sort -u | tail -1 > /tmp/result.$1
else
cat /proc/cpuinfo | grep MHz | sort -u > /tmp/result.$1
fi
./msr 0 >> /tmp/result.$1
max_perf_pct=$(cat /sys/devices/system/cpu/intel_pstate/max_perf_pct)
echo "max_perf_pct $max_perf_pct" >> /tmp/result.$1
for job in `jobs -p`
do
echo "waiting for job id $job"
wait $job
done
}
#
# MAIN (ALL UNITS IN MHZ)
#
# Get the marketing frequency
_mkt_freq=$(cat /proc/cpuinfo | grep -m 1 "model name" | awk '{print $NF}')
_mkt_freq=$(echo $_mkt_freq | tr -d [:alpha:][:punct:])
mkt_freq=${_mkt_freq}0
# Get the ranges from cpupower
_min_freq=$(cpupower frequency-info -l | tail -1 | awk ' { print $1 } ')
min_freq=$(($_min_freq / 1000))
_max_freq=$(cpupower frequency-info -l | tail -1 | awk ' { print $2 } ')
max_freq=$(($_max_freq / 1000))
for freq in `seq $max_freq -100 $min_freq`
do
echo "Setting maximum frequency to $freq"
cpupower frequency-set -g powersave --max=${freq}MHz >& /dev/null
[ $EVALUATE_ONLY -eq 0 ] && run_test $freq
done
echo "=============================================================================="
echo "The marketing frequency of the cpu is $mkt_freq MHz"
echo "The maximum frequency of the cpu is $max_freq MHz"
echo "The minimum frequency of the cpu is $min_freq MHz"
cpupower frequency-set -g powersave --max=${max_freq}MHz >& /dev/null
# make a pretty table
echo "Target Actual Difference MSR(0x199) max_perf_pct"
for freq in `seq $max_freq -100 $min_freq`
do
result_freq=$(cat /tmp/result.${freq} | grep "cpu MHz" | awk ' { print $4 } ' | awk -F "." ' { print $1 } ')
msr=$(cat /tmp/result.${freq} | grep "msr" | awk ' { print $3 } ')
max_perf_pct=$(cat /tmp/result.${freq} | grep "max_perf_pct" | awk ' { print $2 } ' )
if [ $result_freq -eq $freq ]; then
echo " $freq $result_freq 0 $msr $(($max_perf_pct*3300))"
else
echo " $freq $result_freq $(($result_freq-$freq)) $msr $(($max_perf_pct*$max_freq))"
fi
done
exit 0
den' name='id' value='c73e44269369e936165f0f9b61f1f09a11dae01c'/>
net: thunderx: avoid dereferencing xcv when NULL
This fixes the following smatch and coccinelle warnings:
drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119 xcv_setup_link() error: we previously assumed 'xcv' could be null (see line 118) [smatch]
drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119:16-20: ERROR: xcv is NULL but dereferenced. [coccinelle]
Fixes: 6465859aba1e66a5 ("net: thunderx: Add RGMII interface type support")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>