Age | Commit message (Collapse) | Author | Files | Lines |
|
The city_{src,dst}, country_{src,dst} and rev_dns_{src,dst} members of
struct flow_entry have their size defined at compile time, so perform
the equal size checks at compile time as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Seems it was caused by specifying all netfilter groups
when flushing connections.
Used separated nfct instance w/o netfilter groups to
flush ipv4/ipv6 connections.
More info can be fetched from the issue item on github:
https://github.com/netsniff-ng/netsniff-ng/issues/145
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Clean up ncurses screen when panic was caused. There will be limitation
that error message will be printed on stderr after ncurses cleanup, so
it will be needed now to use redirect to error file ...
ifpps -d <dev> 2> /tmp/err
... to see error message.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add match device name with "_" in /proc/net/dev.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
'G' should be printed when bytes > 1000000000 but
it was printed with 'M' prefix which was caused
by missing 'else'.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Replace n & tmp variables to more understandable prev & next.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Rename tcp -> is_tcp param and change it to bool.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Convert int -> bool as parameter.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Use bool as return type in flow_entry_get_extended_is_dns(...) func.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Only 0/1 are used as return values, change to type bool.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Use a switch statement instead of looking up a valid state in the
*_states_show bool arrays in presenter_flow_wrong_state(). This makes
the code a bit easier to read.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
The check for pkt being NULL is not needed since the packet is allocated
in dissector_entry_point() and panic()'s if the allocation fails.
pkt->sll is also guaranteed to be non-NULL by all call sites of
dissector_entry_point().
This is the proper fix for CIDs 1312074 and 1312075.
Noticed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Fix indentation for multiline function calls and correct a typo in the
same area.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
pkt is dereferenced before it is checked. Move the dereference after the
the check.
Detected by the Coverity Scanner (CID 1312074 & 1312075).
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Just assign a default value of false and override it with true if the
checks go through.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
We currently don't dump the actual error message whereas we should
allow the user to identify a problem more easily.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Use helpers from sysctl.c module to set sock memory params
via /proc/sys/net/core.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Use sysctl helpers to set /proc/sys/net/core/bpf_jit_enable param.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Moved sysctl get/set funcs from flowtop to separated sysctl module.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Follow-up of commit 9a89c1d813fb ("Revert "flowtop: Fix hanging
while waiting for collector"") which both address the clean up
in the panic handler.
This reverts commit 451275470106024f106a310a5af050b3ca046a4f.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Vadim says:
"This series reverts unnecesseary cond lock when presenter waits for
collector to finish its initializing part before do screen initializing,
it was added only to do not panic collector when screen is initialized
with ncurses so after this shell will be colored."
Now screen is cleaned up in panic handler so cond lock is not needed
anymore. This reverts commit 3beaa23d4d33b51a392b56f110c8773151ac19cc.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Align the arguments/parameters on successive lines with the opening
parenthesis.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
flowtop and the netsniff-ng's netlink message dissector both need to get
the process name for a pid from /proc/<pid>/exe, thus move that
functionality to an own function.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Make the path creation a bit more straight-forward.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Print flow bytes amount in human readable format units (G,M,K).
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[tklauser: Make bandw2str static, change arg type, formatting]
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Count flows which might be showed and show this number
on the top status line.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Mark each flow if it is visible on the screen to know if it is needed
update traffic acct info.
Changed to use non blocking recv of nf conntrack events to update
traffic accounting.
Now nf_conntrack is cloned when new flow entry is added to send dump
request which is used to update traffic accounting info (packet, bytes).
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[tklauser: Formatting changes]
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Change code to walk each flow by presenter to look more understandable.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[tklauser: Revert unnecessary whitespace changes]
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Fixed issue when flowtop hangs be cause of wrong using pthread cond
lockiing, so the lock should be locked first by calling thread before
call to pthread_cond_wait.
Fixes: 451275470106 ("flowtop: Don't init screen until collector is ready")
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
While removing flow which is pointed by 'head' then head is set to
NULL and all the list disappears, so fixed by set removing flow next
entry to list 'head'.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Just get this properly aligned.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add the same note about using iptables to activate conntrack as it is
already described in 'flowtop -h', just to keep it in the man page too.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Make the function name more in line with the scheme we use for other
similar functions: the function prefixed with __ returns a negative
error code, the function without prefix panic()'s on error.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Print minimum needed packet size in case if validation error.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Add a doc where a link to Travis CI can be found.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
NTF_SELF and NTF_MASTER might not be defined on older kernel versions (as
is e.g. the case in the Travis CI build failing [1]). Fix this by
conditionally defining all NTF_* constants.
[1] https://travis-ci.org/netsniff-ng/netsniff-ng/jobs/68779130
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
When installing to the default DESTDIR /usr/local with non existent
/usr/local/share/man/man8 (or any subpath of it), the installation
of manpages fails with e.g.
install: cannot create regular file `/usr/local/share/man/man8/netsniff-ng.8.gz': No such file or directory
make: *** [netsniff-ng_do_install] Error 1
Thus, create any leading, non-existent directories by using the INST
instead of the INSTX command which will call install -d on the path.
Reported-by: James Burnett <James.Burnett@geant.org>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Added dissector_sll.c which uses sockaddr_ll to lookup & print
higher L3 layer protocol.
This dissector is mapped by LINKTYPE_LINUX_SLL link type.
Sample output of dissected Netlink & Ethernet packets.
Truncated manually some longer lines by "...":
> nlmon0 20 1434193547s.717131169ns #6
[ Linux "cooked" Pkt Type 4 (outgoing), If Type 824 (netlink), Addr Len 0, Src (), Proto 0x0 ]
[ NLMSG Family 0 (routing), Len 20, Type 0x0003 (DONE)...
> wlp3s0 52 1434194181s.436224709ns #9
[ Linux "cooked" Pkt Type 4 (outgoing), If Type 1 (ether), Addr Len 6, Src (XX:XX:XX:XX:XX:XX), Proto 0x800 ]
[ IPv4 Addr (XXX.XXX.XXX.XXX => 212.42.76.253), Proto (6), TTL (64), TOS (0), ...
), CSum (0x1ef5) is ok ]
[ Geo (local => Ukraine) ]
[ TCP Port (45849 => 443 (https)), SN (0x1744209), AN (0x46ca9611), DataOff (8) ...
[ Chr .....w.Rj).. ]
[ Hex XX XX XX XX XX XX XX XX XX XX XX XX ]
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Originally submitted by Vadim in a different form, he wrote:
Use Linux "cooked" header for Netlink interface automatically or
as replacement of L2 header if "--cooked" option is specified:
http://www.tcpdump.org/linktypes/LINKTYPE_LINUX_SLL.html
'Cooked headers' makes sense to use for default or nsec pcap
types which does not contain protocol info.
Added new LINKTYPE_LINUX_SLL which indicates pcap file with
Linux "cooked" header as L2 layer header. This pcap file is
compatible with Wireshark's "cooked" header & vice-versa.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add relevant structure and conversion functions in both directions.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[ dbkm: split out patch ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add a --cooked option that we later on use for capturing in cooked
header. For now, this only captures with a dgram packet socket, but
the remaining logic will follow up.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[ dbkm: split out patch ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
LINKTYPE_LINUX_SLL needs datagram packet sockets. We'll need this
function at a later point in time.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
We need this for cooked header support.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[ dbkm: split out patch ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Dissect basic rtnl neighbour info.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Move device string convertions funcs (device_type2str, device_addr2str)
from proto_nlmsg.c to dev.c to use them in other modules.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[ dbkm: minor stylistic fixes ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
IFA_FLAGS and RTPROT_MROUTED might not be defined on older kernel
versions (as is evident from the Travis CI build failing [1]). Fix it by
conditionally using the two definitions.
[1] https://travis-ci.org/netsniff-ng/netsniff-ng/jobs/65887691
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Since commit 107456c ("netsniff-ng, nlmsg: Dissect rtnl link type
messages") netsniff-ng also needs libnl-route-3.0. Install it as well
when building on Travis CI.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Since commit 107456c646ab ("netsniff-ng, nlmsg: Dissect rtnl link type
messages") netsniff-ng also needs libnl-route-3.0. Add it to the list of
packages in the Debian apt-get install line in the INSTALL file.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Add some more dissection logic for dumping rtnetlink related infos
with attributes.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Dump RTnetlink address related info with attributes.
Additional changes:
- print 'Len' info at the end of each attribute.
- print new line before each header if packet
contains more netlink messages
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|