summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-07-11dissector: rename __WITH_PROTOS into HAVE_DISSECTOR_PROTOSDaniel Borkmann6-11/+10
To be more consistent with config.h, rename __WITH_PROTOS into HAVE_DISSECTOR_PROTOS. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11build: refactor tool specific flags into <tool>/MakefileDaniel Borkmann9-9/+28
To get the normal Makefile a bit cleaner, push the tool specific build options into <tool>/Makefile. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11build: for an -rc release exclude curvetun for nowDaniel Borkmann1-2/+8
As curvetun needs to undergo some major cleanups, we exclude it from the main build process for the moment until we have fixed all of it in a non-rc release. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11curvetun: give short note in version infoDaniel Borkmann1-0/+1
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11configure, netsniff-ng: if no libgeopip, do not link against libzDaniel Borkmann3-7/+22
In netsniff-ng, we only use libz in combination with libgeoip, so if we lack either one of them, do not link against the other either. This would be a waste otherwise. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11netsniff-ng: fix recognition of -U command line optionDaniel Borkmann1-1/+1
"-U" has been forgotten to add into shortopts. "--update" works as expeceted however. So simply add "U". Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11configure, netsniff-ng: make netsniff-ng's geoip dependency optionalDaniel Borkmann3-4/+101
Geoip dependency should not be mandatory as it's not a core part of netsniff-ng. This also facilitates compilation on platforms where geoip is not available. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11docs: install: recommend gnuplot for ifppsDaniel Borkmann1-0/+1
ifpps supports a gnuplot-like output. Therefore, recommend the use of gnuplot. It is not mandatory though. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11docs: install: state that we do have an option for distro buildDaniel Borkmann1-11/+14
Brind the doc more up to date since we do have DISTRO=1 et al available from the build system. Thus, no manual hand-tweaking needs to be done, only in rare cases if really necessary. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11oui: update oui file from oui-update.pyDaniel Borkmann1-7/+118
This brings in a fresh version of the oui file via oui-update.py. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11make: help: consolidate <toolnames> to <tool>Daniel Borkmann1-4/+4
In some part of the help text, we speak about <toolnames> in some other <toolname>. Lets consolidate this to <tool> to avoid any possible confusion. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11docs: describe how to build bpf_jit_disasmDaniel Borkmann1-0/+11
Since it's out of the normal build process for now, describe how to build it for advanced users. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11docs: install: simplify dependency descriptionDaniel Borkmann1-18/+21
Make this more clear by proper indent and slightly improved description. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11docs: authors: minor: fix spelling mistakeDaniel Borkmann1-1/+1
We are two, so its maintainers instead of maintainer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11docs: authors: move Tobias one position higherDaniel Borkmann1-1/+1
Tobias Klauser, one of the two netsniff-ng maintainers, did a lot of excellent work since he joined our team. He has now reached a commit count that is currently equal to Markus' count, but since Tobias is more active, move him one position higher. Thanks for the good work Tobias! Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11curvetun_mgmt: consolidate the two mgmt include files into oneDaniel Borkmann4-5/+10
Consolidate the two mgmt include files into one. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11curvetun_client: include crypto instead of single nacl headerDaniel Borkmann1-1/+1
Use the common crypto header file as this is intended for that. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11curvetun: renamed client, server, and management filesDaniel Borkmann8-11/+11
Rename those files so that they are conform to the rest of the files we have in our repository. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-11ifpps: Remove unnecessary memset()Tobias Klauser1-1/+0
stats_avg will be reset to 0 on the first call to stats_top() before displaying any results, thus this memset() is not necessary. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-10ifpps: Remove unecessary whitespaces in mvwprintw() callsTobias Klauser1-8/+8
Remove trailing whitespace where they're not necessary for the background to extend beyond the text. Replace whitespaces needed for tabbing by setting the appropriate format string field width modifiers. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-10ifpps: Reduce default number of top hitter CPUs to 5Tobias Klauser2-3/+3
Since we now also display the average (and in the future possibly also the standard deviation), reduce the default number of CPUs displayed to 5, to keep terminal space usage low. Suggested-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-10ifpps: Calculate and show average values across all CPUsTobias Klauser2-10/+65
Calculate the average for CPU usage, IRQs/t and absolute IRQs across all CPUs (also the ones which are not displayed) and show them below the respective per-CPU values. Mention this fact the man page accordingly. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-10dissector: print hex_ascii combination in unkown linktypesDaniel Borkmann1-5/+4
Commit f5c10ae4e3 ("dissector: do not panic on unknown hatype") let netsniff-ng not panic anymore on unkown ha types, but without explicitly starting netsniff-ng in hex or ascii printing mode, no dissection will happen. This patch fixes this situation so that at least ascii_hex() will be called in case the link type is not known to us. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-10README: Adjust mention of sponsorsTobias Klauser1-2/+3
The sponsors have been moved to AUTHORS from Sponsors in commit 9d310488 ("docs: move sponsor names into authors "), thus adjust the pointer to them in README accordingly. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-10configure: check for flex and bisonDaniel Borkmann1-0/+30
flex and bison are needed for bpfc and trafgen, so check for their existance. If they are not present, lets remove those two from the build in case users do not want it. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-09configure: fix multiple issues in build configurationDaniel Borkmann8-21/+86
This patch is a bundle of multiple fixes. 1) Fix compilation of astraceroute when HAVE_LIBPCAP=1: astraceroute doesn't need libpcap, so add an additional guard/define to bpf.h and bpf_comp.c and netsniff-ng.c. Also since we generate a config.h file, we do not need to have this additional compile flag anymore. 2) Fix tstamping.{h,c} to use the configure script instead of the Makefile. For doing this, also fix the object inclusion in netsniff-ng/Makefile. Last but not least, rename __WITH_... into HAVE_... as this is more clean. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-09all: show git id in --version informationDaniel Borkmann8-20/+34
In order to be able to better track regressions or to give support, let us track the Git id as well in version information. This makes the ``--version'' switch actually useful. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-09configure: let configure script generate config.h fileDaniel Borkmann4-10/+22
While we're at it, also let configure script generate the config.h file. The generation of it is currently quite static, but that could change in future. While at it, we also generate a GITVERSION define, that we will use for ``--version'' output of the individual tools for being able to provide better support since we can see what concrete commit people are using when building from Git repo. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-08configure: when we have all deps rather tell "all tools will be built"Daniel Borkmann1-2/+7
In case we have all dependencies, tell the user that all tools will be built instead of listing the tools. Only list them when we do not have all deps. This should facilitate usability a bit. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-08configure: netsniff-ng: libpcap is not a hard dependencyDaniel Borkmann3-4/+17
netsniff-ng uses libpcap only for high-level filter compiling. Thus, let netsniff-ng not "hard-depend" on libpcap, but rather disable filter compiling in case the user does not want to install libpcap. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-08configure: make: misc: update header commentDaniel Borkmann2-0/+5
Add a header comment to the configure script with Tobias as the primary author, and also mention Tobias as an author in the Makefile itself for his changes. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-08configure: test also tpacket flags e.g. used in TX_RINGDaniel Borkmann1-6/+12
Also try compile-testing TPACKET_V2/3 flags that are used in some particular versions, especially in TX_RING. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-08configure: two fixes on dependenciesDaniel Borkmann1-6/+35
1) netsniff-ng is also dependant on libnl (e.g. for raw 802.11 devices) 2) Only netsniff-ng depends on tpacket_v3, trafgen on tpacket_v2. Thus, add checks for both. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-08configure, Makefile: Conditionally build toolsTobias Klauser2-11/+102
Instead of halting out the entire build build if one dependency is not available, only exclude the tools that link against it from building. The configure script will now print a list of all tools that will be built -- and in case some libaries are not available -- that will not be built. Also add checks for libcli and libnet which mausezahn depends on. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-08configure: Add check for libpcapTobias Klauser1-0/+24
libpcap is used to compile tcpdump-like filters in netsniff-ng, so check for it in configure. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-08configure: Call a function from libgeoip in check_libgeoip()Tobias Klauser1-1/+3
In order to cause the linker to get called and thus the check for the presence of the library (not just the headers) to be performed, call GeoIP_new(). Also pass the proper linker flag to $CC. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-08configure: Call a function from zlib in check_zlib()Tobias Klauser1-1/+3
In order to cause the linker to get called and thus the check for the presence of the library (not just the headers) to be performed, call gzopen(). Also pass the proper linker flags to $CC. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-08configure: Fix check for libnetfilter-conntrackTobias Klauser1-2/+4
Correct the type to struct nf_conntrack and call a function to prevent the variable from getting optimized away by the compiler and cause a linker call. Also add the proper linker flag. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-08config: check for liburcuDaniel Borkmann1-0/+24
Add a configure script extension that checks for liburcu as it is currently needed by flowtop. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-08config: check for libzDaniel Borkmann1-2/+23
Add a configure extension to check for libz that is needed for the geoip updater. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-08config: execute check_libnf_ct function to check for conntrackDaniel Borkmann1-0/+1
The check_libnf_ct function is implemented in configure, but it was not executed currently. So from now on invoke it and check for netfilter's conntrack library. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-08config: check for available databasesDaniel Borkmann1-0/+8
We need to have: GEOIP_CITY_EDITION_REV1, GEOIP_CITY_EDITION_REV1_V6, GEOIP_COUNTRY_EDITION, GEOIP_COUNTRY_EDITION_V6, GEOIP_ASNUM_EDITION, GEOIP_ASNUM_EDITION_V6. Not all might be available on older versions. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-08conntrack: consolidate all conntrack header includes into conntrack.hDaniel Borkmann2-4/+10
Consolidate all conntrack header includes into conntrack.h as this is more clean. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-05configure: Don't redirect output of pkg-configTobias Klauser1-8/+8
This will of course also lead to the flags getting redirected. Silly me. While at it also remove the pointless warning flags to cc. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-05Makefile, INSTALL: Simplify clean/uninstall Makefile targetsTobias Klauser2-27/+38
Streamline the Makfile targets by separating the clean targets (which only affect the build tree) from the uninstall targets (affecting files installed in the system). Do this by renaming the 'distclean' target to 'uninstall' and removing unnecessary aliases. The 'distclean' target serves now as a way to remove build files and Config. The 'mrproper' will bring the source into a pristine state as checked out from git. Summary of the new/changed targets: clean: remove all build related files (but not Config) distclean: 'make clean' + remove Config mrproper: remove all files not in git repository uninstall: remove all files installed by us from the system, but not affecting the build environment. %_uninstall: tool specific uninstall The following targets were removed: mostlyclean, realclean and clobber. Also the target names in the INSTALL file are adjusted. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-05INSTALL: minor: Fix typo 'mainling list'Tobias Klauser1-1/+1
This should be 'mailing list' instead of 'mainling list'. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-05configure, Makefile: Fail in Makefile if Config is not completeTobias Klauser2-1/+6
Define CONFIG_OK in the Config file generated in the configure script and check for it being defined in the Makefile before attempting anything else. This way we can better inform the user that she needs to run ./configure first. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-05configure: Silence pkg-config callsTobias Klauser1-5/+9
Redirect the output of pkg-config to /dev/null so it doesn't clutter the output of the configure script. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2013-07-03dev: linktype: use ARPHRD_ETHER for "any" deviceDaniel Borkmann1-1/+3
Use ARPHRD_ETHER for the "any" device, so that when typing "netsniff-ng" without any arguments, ethernet is assumed. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
2013-07-03netsniff-ng: ctx: init and destruct methods for ctxDaniel Borkmann1-18/+33
Refactor ctx initialization and destruction into separate handlers. That is more clean. Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-22 18:23:09 +0000