summaryrefslogtreecommitdiff
path: root/trafgen_l4.c
AgeCommit message (Collapse)AuthorFilesLines
2016-09-21trafgen: icmpv6: Update csum at runtime if neededVadim Kochan1-13/+19
Use same function to calculate csum for packet_update and for packet_finish events. Allow update csum if one of the ICMPv6 fields was changed. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-09-21trafgen: icmpv4: Update csum at runtime if neededVadim Kochan1-4/+16
Update csum if any of the ICMPv4 field was changed. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-08-12trafgen: proto: Split static protocol definition out of struct proto_hdrTobias Klauser1-11/+11
Currently struct proto_hdr is used twofold: 1) Statically define protocol behavior, i.e. all the *_hdr definitions in trafgen_l{2,3,4}.c which map a protocol id/layer to a set of callback functions. 2) For each packet created at parse time the struct is memcpy()'ed (including all the static information from 1) and then used to store dynamic information at parse/run time. Thus, struct proto_hdr members such as the proto id, layer and the pointers callback functions get copied for each created packet (in addition to the other fields which get changed during parsing). Also, static/dynamic information get mixed and we e.g. can't make the protocol definitions const to ensure they'll not get changed by mistake. Rather than copying the struct proto_hdr for every packet, clearly separate the two purposes defined above by splitting struct proto_hdr into two structs: 1) struct proto_ops for the static (const) protocol behavior definition 2) struct proto_hdr (reduced) for dynamic information struct proto_hdr keeps a pointer to the corresponding proto_ops instance and uses it to execute the corresponding callbacks. Reference: https://groups.google.com/forum/#!msg/netsniff-ng/20RvwJdh50Y/eMkbmKSaBgAJ Acked-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-07-18trafgen: udp: Do not use user-provided 'len' field to calculate csumVadim Kochan1-2/+0
Do not use user-provided 'len' field for csum calculation which is potentially dangerous due to possible read buffer overflows. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> [tk: reword commit message] Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-07-13trafgen: proto: Add ICMPv4 header generationVadim Kochan1-0/+42
Support for generating ICMPv4 headers using the 'icmp4()/icmpv4()' trafgen generation functions. Fields supported: type Set type field (default 0: Echo reply) Supported keywords: echorequest, echoreply code Set code field (default 0) csum Set checksum field (calculated by default) mtu Set mtu field for destination unreachable (default 0) seq Set sequence field (default 0) id Set identifier field (default 0) addr Set redirect address (default 0.0.0.0) Example (send ping request): { icmpv4(echorequest, seq=1, id=1326) } Signed-off-by: Vadim Kochan <vadim4j@gmail.com> [tk: squash commits, consistency between functionality and docu] Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-04-25trafgen: proto: Add ICMPv6 header generationTobias Klauser1-0/+49
Support for generating simple ICMPv6 headers using the 'icmp6()/icmpv6()' trafgen generation function. Fields supported: mtype Message type (default: 0) Supported keywords: echorequest, echoreply code Code (default: 0) csum Message checksum (calculated by default) Examples: { eth(), ipv6(daddr=::1), icmpv6(echorequest), 42, 42, 0, 0 }' If not explicitely specified, the lower header is initialized as Ethernet. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-04-25trafgen: proto: Add IPv6 header generationTobias Klauser1-30/+54
Support for generating simple IPv6 headers using the 'ip6()/ipv6()' trafgen generation function. Fields supported: ver|version Version (default: 6) tc|tclass Traffic class (default: 0) fl|flow Flow Label (default: 0) len|length Payload length (calculated by default) nh|nexthdr Type of next header (default: 0) hl|hoplimit|ttl Hop Limit, TTL (default: 0) sa|saddr Source IPv6 address (default: device address) da|daddr Destination IPv6 address (default: 0:0:0:0:0:0:0:0) Examples: { eth(), ipv6(daddr=1:2:3:4:5:6:7:8) } { ipv6(tc=2, hl=3, daddr=::1) } { eth(), ipv6(nh=58, sa=2001:db8::, da=::1), 128, 0, 0x52, 0x03, 0, 0, 0, 0 } If not explicitely specified, the lower header is initialized as Ethernet. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-02-02trafgen: ipv4: Add setting next protocol idVadim Kochan1-14/+2
Move setting lower protocol id field value from UDP & TCP protocols to IPv4 only, so lower layer will know exactly value to set in protocol id field. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-02-02trafgen: proto: Add set_next_proto callback to struct proto_hdrVadim Kochan1-1/+1
Add set_next_proto callback to proto_hdr struct to allow lower protocol set next protocol id by enum proto_id. Extended proto_lower_default_add(...) function to take upper protocol to delegate it's id to lower protocol to set next protocol field. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-02-02trafgen: proto: Simplify getting lower protocol after initVadim Kochan1-3/+1
Change proto_header_init(...) and proto_lower_default_add(...) functions to return struct proto_hdr * to do not call proto_current_header(...) after, so it makes more sense to get struct proto_hdr * right after initializing protocol by id. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-02-01trafgen: parser: Add TCP header generation functionTobias Klauser1-0/+64
Add a function 'tcp()' to generate TCP headers from the trafgen configuration language. Fields supported: sp|sport TCP source port (default 0) dp|dport TCP destination port (default 0) seq Sequence number (default: 0) aseq|ackseq Acknowledgement number (default 0) doff|hlen Header length/data offset (default: 5) cwr Congestion Window Reduced flag (default: 0) ece|ecn ECN-Echo flag (default: 0) urg Urgent flag (default: 0) ack Acknowledgement flag (default: 0) psh Push flag (default: 0) rst Reset flag (default: 0) syn Synchronize flag (default: 0) fin Finish flag (default: 0) win|window Receive window size (default: 0) csum Checksum field (calculated automatically) urgptr Urgent pointer (default: 0) Example (SYN on port 80/http): { tcp(dport=80, syn, window=5840) } Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-01-29trafgen: l4: Add UDP header generation logicVadim Kochan1-0/+71
Add trafgen_l4.c module with generation UDP header fields. UDP protocol generation logic automaticaly sets the protocol field of the lower level protocol to IPPROTO_UDP by default (if it is IPv4). Also checksum & length are calculated and set if it is not given by the user. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>