summaryrefslogtreecommitdiff
path: root/trafgen_proto.h
AgeCommit message (Collapse)AuthorFilesLines
2016-09-21trafgen: proto: Update field value at runtimeVadim Kochan1-0/+15
Add basic infrastructure for update proto field value at runtime by dynamic field function. Extended 'struct packet_dyn' with proto fields which has dynamically changing values at runtime. Added 'field_changed' callback for proto header which may be used for check if csum updating is needed. This callback is called after field was changed at runtime. Added 'packet_update' callback to let proto header know when to apply final proto header changes at runtime (e.g. - csum update). Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-08-12trafgen: proto: Split static protocol definition out of struct proto_hdrTobias Klauser1-19/+21
Currently struct proto_hdr is used twofold: 1) Statically define protocol behavior, i.e. all the *_hdr definitions in trafgen_l{2,3,4}.c which map a protocol id/layer to a set of callback functions. 2) For each packet created at parse time the struct is memcpy()'ed (including all the static information from 1) and then used to store dynamic information at parse/run time. Thus, struct proto_hdr members such as the proto id, layer and the pointers callback functions get copied for each created packet (in addition to the other fields which get changed during parsing). Also, static/dynamic information get mixed and we e.g. can't make the protocol definitions const to ensure they'll not get changed by mistake. Rather than copying the struct proto_hdr for every packet, clearly separate the two purposes defined above by splitting struct proto_hdr into two structs: 1) struct proto_ops for the static (const) protocol behavior definition 2) struct proto_hdr (reduced) for dynamic information struct proto_hdr keeps a pointer to the corresponding proto_ops instance and uses it to execute the corresponding callbacks. Reference: https://groups.google.com/forum/#!msg/netsniff-ng/20RvwJdh50Y/eMkbmKSaBgAJ Acked-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-08-09trafgen: proto: Make bytes pointer const in proto field set functionsTobias Klauser1-2/+2
Make the __proto_field_set_bytes() take a const uint8_t *bytes pointer and also changed all callers accordingly. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-08-09trafgen: proto: Store registered protocols in an arrayTobias Klauser1-1/+2
Protocols are registered early at startup and aren't changed at runtime. In order to speed up lookup while parsing, store the pointers to the protocol definitions (struct proto_hdr) in an array, indexed by protocol id rather than in a linked list. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-08-09trafgen: proto: Don't store context in each proto headerTobias Klauser1-5/+0
Use a module variable to access the proto context instead of storing a pointer in every header. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-08-02trafgen: proto: Reference to packet from struct proto_hdrVadim Kochan1-0/+4
Using of current_packet() is not possible for dynamically updated fields so we need to keep the packet index in proto_hdr struct to reference the correct packet. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-07-18trafgen: ipv4: Do not use user-provided 'ihl' field to calculate csumVadim Kochan1-0/+1
It is potentially dangerous to use the user specified IHL field for csum calculation, as it might lead to read buffer overflows. Instead introduce and use the len field in struct proto_hdr which is calculated automatically after the header is built. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> [tk: reword commit message] Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-07-13trafgen: proto: Add ICMPv4 header generationVadim Kochan1-0/+1
Support for generating ICMPv4 headers using the 'icmp4()/icmpv4()' trafgen generation functions. Fields supported: type Set type field (default 0: Echo reply) Supported keywords: echorequest, echoreply code Set code field (default 0) csum Set checksum field (calculated by default) mtu Set mtu field for destination unreachable (default 0) seq Set sequence field (default 0) id Set identifier field (default 0) addr Set redirect address (default 0.0.0.0) Example (send ping request): { icmpv4(echorequest, seq=1, id=1326) } Signed-off-by: Vadim Kochan <vadim4j@gmail.com> [tk: squash commits, consistency between functionality and docu] Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-04-25trafgen: proto: Add ICMPv6 header generationTobias Klauser1-0/+1
Support for generating simple ICMPv6 headers using the 'icmp6()/icmpv6()' trafgen generation function. Fields supported: mtype Message type (default: 0) Supported keywords: echorequest, echoreply code Code (default: 0) csum Message checksum (calculated by default) Examples: { eth(), ipv6(daddr=::1), icmpv6(echorequest), 42, 42, 0, 0 }' If not explicitely specified, the lower header is initialized as Ethernet. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-04-25trafgen: proto: Add IPv6 header generationTobias Klauser1-0/+3
Support for generating simple IPv6 headers using the 'ip6()/ipv6()' trafgen generation function. Fields supported: ver|version Version (default: 6) tc|tclass Traffic class (default: 0) fl|flow Flow Label (default: 0) len|length Payload length (calculated by default) nh|nexthdr Type of next header (default: 0) hl|hoplimit|ttl Hop Limit, TTL (default: 0) sa|saddr Source IPv6 address (default: device address) da|daddr Destination IPv6 address (default: 0:0:0:0:0:0:0:0) Examples: { eth(), ipv6(daddr=1:2:3:4:5:6:7:8) } { ipv6(tc=2, hl=3, daddr=::1) } { eth(), ipv6(nh=58, sa=2001:db8::, da=::1), 128, 0, 0x52, 0x03, 0, 0, 0, 0 } If not explicitely specified, the lower header is initialized as Ethernet. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-02-23trafgen: l2: Add MPLS header generationVadim Kochan1-0/+1
Add support for MPLS header creating with fields: Label, TClass, Bottom-Stack, TTL By default S-field is set to 1 (last label), but resets to 0 if lower MPLS header is added. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-02-03trafgen: proto: Make proto_current_header() staticTobias Klauser1-1/+0
After commit 88b359d2aa7e ("trafgen: proto: Simplify getting lower protocol after init") proto_current_header() is no longer used outside trafgen_proto.c, so make it static. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-02-02trafgen: l2: Add VLAN header generationVadim Kochan1-1/+3
Add generation of VLAN header with supported fields: TPID, DEI/CFI, PCP, VID Changed struct proto_field.offset uint16_t -> int16_t to make TPID offset -2 to point to ether type. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-02-02trafgen: proto: Add set_next_proto callback to struct proto_hdrVadim Kochan1-1/+3
Add set_next_proto callback to proto_hdr struct to allow lower protocol set next protocol id by enum proto_id. Extended proto_lower_default_add(...) function to take upper protocol to delegate it's id to lower protocol to set next protocol field. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-02-02trafgen: proto: Simplify getting lower protocol after initVadim Kochan1-2/+2
Change proto_header_init(...) and proto_lower_default_add(...) functions to return struct proto_hdr * to do not call proto_current_header(...) after, so it makes more sense to get struct proto_hdr * right after initializing protocol by id. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-02-01trafgen: proto: Mark fields parameter to proto_header_fields_add as constTobias Klauser1-4/+5
It's not changed inside the function, so mark it as const. Also adjust the header guards. Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-01-28trafgen: proto: Add functon to fill field with device ipv4 addressVadim Kochan1-0/+3
Add helper which fills a device's ipv4 addr to the specified protocol field. It will be used by protocols like ARP, IPv4, etc. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-01-28trafgen: proto: Add function to set field from device MACVadim Kochan1-0/+3
Add helper function to set device's MAC address to protocol field which may be used by Ethernet & ARP protocol header generation functions. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2016-01-28trafgen: Add basic protocol generation logicVadim Kochan1-0/+97
Add new trafgen_proto.c module with basic protocol header fields generation logic. This will allow to support protocol specific keywords in the trafgen configuration language. Each protocol must implement struct proto_hdr and register it to the global proto list. Protocol headers consist of a set of fields, and each field must be described via struct proto_field by specifying unique id, length and offset (relative to the header start). Fields smaller than 8 bits can be described via left shift & mask. The following callbacks are invoked to perform special actions to build the header during parsing: 1) header_init - required fields must be added to the packet and initialized with default values. 2) header_finish - it is invoked when header is specified, all user specified fields are set. 3) packet_finish - callback is invoked from upper to lower header to calculate fields depending on upper layers such as total length or checksum. The protocol generation API provides convenience protocol field setters/getters to to be used in the parser while crafting the packet. Signed-off-by: Vadim Kochan <vadim4j@gmail.com> [tk: wordsmithing on commit message, minor variable type changes] Signed-off-by: Tobias Klauser <tklauser@distanz.ch>