From 9ff7dd965595d4ce641904be5dd2ceb9e5a64a1f Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 30 Apr 2013 12:25:59 +0200 Subject: man: trafgen: add initial version Add an initial version of the trafgen man-page. There are still a couple of TODO marked section that need to be addressed in follow-up commits. Signed-off-by: Daniel Borkmann --- man/trafgen.8 | 235 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 235 insertions(+) create mode 100644 man/trafgen.8 (limited to 'man') diff --git a/man/trafgen.8 b/man/trafgen.8 new file mode 100644 index 0000000..9c88290 --- /dev/null +++ b/man/trafgen.8 @@ -0,0 +1,235 @@ +.\" netsniff-ng - the packet sniffing beast +.\" Copyright 2013 Daniel Borkmann. +.\" Subject to the GPL, version 2. + +.TH TRAFGEN 8 "03 March 2013" "Linux" "netsniff-ng toolkit" +.SH NAME +trafgen \- a fast, multithreaded network packet generator + +.SH SYNOPSIS + +\fB trafgen\fR [\fIoptions\fR] + +.SH DESCRIPTION + +trafgen is a fast, zero-copy network traffic generator for debugging, +performance evaluation and fuzz-testing purposes. trafgen utilizes the packet(7) +socket interface of Linux which postpones complete control over packet data +and packet headers into the user space. It has a powerful packet configuration +language, which is rather low-level and not limited to particular protocols. +Thus, trafgen can be used for many purposes. Its only limitation is that it +cannot mimic full streams resp. sessions. However, it is very useful for +various kinds of load testing in order to analyze and subsequently improve +systems behaviour under DoS attack scenarios, for instance. + +trafgen is Linux specific only, meaning there is no support for other operating +systems just as in netsniff-ng(8), thus we can keep the code footprint quite +minimal and to the point. trafgen makes use of packet(7) socket's TX_RING +interface of the Linux kernel, which is a mmap(2)'ed ring buffer shared between +user and kernel space. + +On default, trafgen starts as many processes as CPUs that are online, pins each +of them to their respective CPU and sets up the ring buffer each in their own +process space after having compiled a list of packets to transmit. Thus, this is +likely the fastest one can get out of the box in terms of transmission performance +from user space, without having to load unsupported or non-mainline third-party +kernel modules. On Gigabit Ethernet, trafgen has a comparable performance to +pktgen, the built-in Linux kernel traffic generator, only that trafgen is more +flexible in terms of packet configuration possibilities. On 10-Gigabit-per-second +Ethernet, trafgen might be slower than pktgen due to the user/kernel space +overhead but still has a fairly high performance for out of the box kernels. + +trafgen has a possibility to do fuzz testing, meaning a packet configuration can +be built with random numbers on all or certain packet offsets that are freshly +generated each time a packet is sent out. With a built-in IPv4 ping, trafgen can +send out an ICMP probe after each packet injection to the remote host in order +to test if it is still responsive/alive. Assuming there is no answer from the +remote host after a certain threshold of probes, the machine is considered dead +and the last sent packet is printed together with the random seed that was used +by trafgen. You might not really get lucky fuzz-testing the Linux kernel, but +presumably there are buggy closed-source embedded systems or network driver's +firmware files that are prone to bugs, where trafgen could help in finding them. + +trafgen's configuration language is quite powerful, also due to the fact, that +it supports C preprocessor macros. A stddef.h is being shipped with trafgen for +this purpose, so that well known defines from Linux kernel or network programming +can be reused. After a configuration file has passed the C preprocessor stage, +it is processed by the trafgen packet compiler. The language itself supports a +couple of features that are useful when assembling packets, such as built-in +runtime checksum support for IP, UDP and TCP. Also it has an expression evaluator +where arithmetic (basic operations, bit operations, bit shifting, ...) on constant +expressions is being reduced to a single constant on compile time. Other features +are ``fill'' macros, where a packet can be filled with n bytes by a constant, a +compile-time random number or run-time random number (as mentioned with fuzz +testing). Also, netsniff-ng(8) is able to convert a pcap file into a trafgen +configuration file, thus such a configuration can then be further tweaked for a +given scenario. + +.SH OPTIONS + +.SS -i , -c , --in , --conf +TODO + +.SS -o , -d , --out , --dev +TODO + +.SS -p, --cpp +Pass the packet configuration to + +.SS -J, --jumbo-support +On default trafgen's ring buffer frames are of a fixed size of 2048 bytes. +This means that if you're expecting jumbo frames or even super jumbo frames to +pass your line, then you need to enable support for that with the help of this +option. However, this has the disadvantage of a performance regression and a +bigger memory footprint for the ring buffer. + +.SS -R, --rfraw +In case the output networking device is a wireless device, it is possible with +trafgen to turn this into monitor mode and create a mon device that trafgen +will be transmitting on instead of wlan, for instance. This enables trafgen +to inject raw 802.11 frames. + +.SS -s , --smoke-test +TODO + +.SS -n <0|uint>, --num <0|uint> +Process a number of packets and then exit. If the number of packets is 0, then +this is equivalent to infinite packets resp. processing until interrupted. +Otherwise, a number given as an unsigned integer will limit processing. + +.SS -r, --rand +Randomize the packet selection of the configuration file. On default, if more +than one packet is defined in a packet configuration, packets are scheduled for +transmission in a round robin fashion. With this option, they are selected +randomly instread. + +.SS -P , --cpus +Specify the number of processes trafgen shall fork(2) off. On default trafgen +will start as many processes as CPUs that are online and pin them to each, +respectively. Allowed value must be within interval [1,CPUs]. + +.SS -t , --gap +Specify a static inter-packet timegap in micro-seconds. If this option is given, +then instead of packet(7)'s TX_RING interface, trafgen will use sendto(2) I/O +for network packets, even if the argument is 0. This option is useful for +a couple of reasons: i) comparison between sendto(2) and TX_RING performance, +ii) low-traffic packet probing for a given interval, iii) ping-like debugging +with specific payload patterns. Furthermore, the TX_RING interface does not cope +with interpacket gaps. + +.SS -S , --ring-size +Manually define the RX_RING resp. TX_RING size in ``KiB/MiB/GiB''. On +default the size is being determined based on the network connectivity rate. + +.SS -k , --kernel-pull +Manually define the interval in micro-seconds where the kernel should be triggered +to batch process the ring buffer frames. On default, it is every 10us, but it can +manually be prolonged, for instance.. + +.SS -E , --seed +Manually set the seed for trafgen. On default, a random seed from /dev/urandom +is being used to feed glibc's pseudo random number generator. If that fails, it +falls back to the unix timestamp. It can be useful to set it up manually to be +able to reproduce a trafgen session, e.g. after fuzz testing. + +.SS -u , --user resp. -g , --group +After ring setup drop privileges to a non-root user/group combination. + +.SS -V, --verbose +Let trafgen be more talkative and let it print the parsed configuration and +some ring buffer statistics. + +.SS -e, --example +Show a built-in packet configuration example. This might be a good starting +point for an initial packet configuration scenario. + +.SS -v, --version +Show versioning information. + +.SS -h, --help +Show user help. + +.SH SYNTAX +TODO + +.SH SOURCE EXAMPLES +TODO + +.SH USAGE EXAMPLE +TODO + +.SH NOTE +trafgen can saturate a Gigabit Ethernet link without problems. As always, +of course, this depends on your hardware as well. Not everywhere where it +says Gigabit Ethernet on the box, you'll reach almost physical line rate! +Please also read the netsniff-ng(8) man page, section NOTE for further +details about tuning your system e.g. with tuned(8). + +If you intend to use trafgen on a 10-Gbit/s Ethernet NIC, make sure you +are using a multiqueue tc(8) discipline, and make sure that the packets +you generate with trafgen will have a good distribution among tx_hashes +so that you'll actually make use of multiqueues. + +For introducing bit errors, delays with random variation and more, there +is no built-in option in trafgen. Rather, one should reuse existing methods +for that which integrate nicely with trafgen, such as tc(8) with its +different disciplines, i.e. netem. + +For more complex packet configurations, it is recommended to use high-level +scripting for generating trafgen packet configurations in a more automated +way, i.e. also to create different traffic distributions that are common for +industrial benchmarking: + + Traffic model Distribution + + IMIX 64:7, 570:4, 1518:1 + Tolly 64:55, 78:5, 576:17, 1518:23 + Cisco 64:7, 594:4, 1518:1 + RPR Trimodal 64:60, 512:20, 1518:20 + RPR Quadrimodal 64:50, 512:15, 1518:15, 9218:20 + +The low-level nature of trafgen makes trafgen rather protocol independant +and therefore useful in many scenarios when stress testing is needed, for +instance. However, if a traffic generator with higher level packet +descriptions is desired, netsniff-ng's mausezahn(8) can be of good use as +well. + +For smoke/fuzz testing with trafgen, it is recommended to have a direct +link between the host you want to analyze (``victim'' machine) and the host +you run trafgen on (``attacker'' machine). If the ICMP reply from the victim +fails, we assume that probably its kernel crashed, thus we print the last +sent packet togther with the seed and quit probing. It might be very unlikely +to find such a ping-of-death on modern Linux systems. However, there might +be a good chance to find it on some proprietary (e.g. embedded) systems or +buggy driver firmwares that are in the wild. Also, fuzz testing can be done +on raw 802.11 frames, of course. In case you find a ping-of-death, please +mention that you were using trafgen in your commit message of the fix! + +.SH BUGS +When I start trafgen, my kernel crashes: we have fixed this bug in the +mainline and stable kernels under commit 7f5c3e3a8 (``af_packet: remove +BUG statement in tpacket_destruct_skb''). Either update your kernel to +the latest version, e.g. clone and build it from git.kernel.org, to a +stable kernel, or don't start multiple trafgen instances at once resp. +start trafgen with flag -A to disable temporary socket memory adaptation! + +.SH LEGAL +trafgen is licensed under the GNU GPL version 2.0. + +.SH HISTORY +.B trafgen +was originally written for the netsniff-ng toolkit by Daniel Borkmann. It +is currently maintained by Tobias Klauser and Daniel +Borkmann . + +.SH SEE ALSO +.BR netsniff-ng (8), +.BR mausezahn (8), +.BR ifpps (8), +.BR bpfc (8), +.BR flowtop (8), +.BR astraceroute (8), +.BR curvetun (8) + +.SH AUTHOR +Manpage was written by Daniel Borkmann. -- cgit v1.2.3-54-g00ecf