/* * netsniff-ng - the packet sniffing beast * Copyright 2012 Markus Amend , Deutsche Flugsicherung GmbH * Subject to the GPL, version 2. * * IPv6 Destination Options Header described in RFC2460 */ #include #include #include /* for ntohs() */ #include "proto.h" #include "dissector_eth.h" #include "built_in.h" #include "pkt_buff.h" struct dest_optshdr { uint8_t h_next_header; uint8_t hdr_len; } __packed; static void dissect_opt_dest(struct pkt_buff *pkt __maybe_unused, ssize_t *opt_len) { /* Have to been upgraded. * http://tools.ietf.org/html/rfc2460#section-4.2 * Look also for proto_ipv6_hop_by_hop.h, it needs * dissect_opt(), too. */ if (*opt_len) tprintf(", Option(s) recognized "); /* If adding dissector reduce opt_len for each using of pkt_pull * to the same size. */ } static void dest_opts(struct pkt_buff *pkt) { uint16_t hdr_ext_len; ssize_t opt_len; struct dest_optshdr *dest_ops; dest_ops = (struct dest_optshdr *) pkt_pull(pkt, sizeof(*dest_ops)); if (dest_ops == NULL) return; /* Total Header Length in Bytes */ hdr_ext_len = (dest_ops->hdr_len + 1) * 8; /* Options length in Bytes */ opt_len = hdr_ext_len - sizeof(*dest_ops); tprintf("\t [ Destination Options "); tprintf("NextHdr (%u), ", dest_ops->h_next_header); if (opt_len > pkt_len(pkt) || opt_len < 0) { tprintf("HdrExtLen (%u, %u Bytes, %s)", dest_ops->hdr_len, hdr_ext_len, colorize_start_full(black, red) "invalid" colorize_end()); return; } tprintf("HdrExtLen (%u, %u Bytes)", dest_ops->hdr_len, hdr_ext_len); dissect_opt_dest(pkt, &opt_len); tprintf(" ]\n"); pkt_pull(pkt, opt_len); pkt_set_proto(pkt, ð_lay3, dest_ops->h_next_header); } static void dest_opts_less(struct pkt_buff *pkt) { uint16_t hdr_ext_len; ssize_t opt_len; struct dest_optshdr *dest_ops; dest_ops = (struct dest_optshdr *) pkt_pull(pkt, sizeof(*dest_ops)); if (dest_ops == NULL) return; /* Total Header Length in Bytes */ hdr_ext_len = (dest_ops->hdr_len + 1) * 8; /* Options length in Bytes */ opt_len = hdr_ext_len - sizeof(*dest_ops); if (opt_len > pkt_len(pkt) || opt_len < 0) return; tprintf(" Dest Ops"); pkt_pull(pkt, opt_len); pkt_set_proto(pkt, ð_lay3, dest_ops->h_next_header); } struct protocol ipv6_dest_opts_ops = { .key = 0x3C, .print_full = dest_opts, .print_less = dest_opts_less, }; ame='id' value='6e978b22efa1db9f6e71b24440b5f1d93e968ee3'/>
diff options
context:
space:
mode:
authorSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>2017-02-03 14:18:39 -0800
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2017-02-04 00:11:08 +0100
commit6e978b22efa1db9f6e71b24440b5f1d93e968ee3 (patch)
treec666f7a26b860674848949e39a610222b0723f89 /arch/arm/boot
parent3c223c19aea85d3dda1416c187915f4a30b04b1f (diff)
cpufreq: intel_pstate: Disable energy efficiency optimization
Some Kabylake desktop processors may not reach max turbo when running in HWP mode, even if running under sustained 100% utilization. This occurs when the HWP.EPP (Energy Performance Preference) is set to "balance_power" (0x80) -- the default on most systems. It occurs because the platform BIOS may erroneously enable an energy-efficiency setting -- MSR_IA32_POWER_CTL BIT-EE, which is not recommended to be enabled on this SKU. On the failing systems, this BIOS issue was not discovered when the desktop motherboard was tested with Windows, because the BIOS also neglects to provide the ACPI/CPPC table, that Windows requires to enable HWP, and so Windows runs in legacy P-state mode, where this setting has no effect. Linux' intel_pstate driver does not require ACPI/CPPC to enable HWP, and so it runs in HWP mode, exposing this incorrect BIOS configuration. There are several ways to address this problem. First, Linux can also run in legacy P-state mode on this system. As intel_pstate is how Linux enables HWP, booting with "intel_pstate=disable" will run in acpi-cpufreq/ondemand legacy p-state mode. Or second, the "performance" governor can be used with intel_pstate, which will modify HWP.EPP to 0. Or third, starting in 4.10, the /sys/devices/system/cpu/cpufreq/policy*/energy_performance_preference attribute in can be updated from "balance_power" to "performance". Or fourth, apply this patch, which fixes the erroneous setting of MSR_IA32_POWER_CTL BIT_EE on this model, allowing the default configuration to function as designed. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Len Brown <len.brown@intel.com> Cc: 4.6+ <stable@vger.kernel.org> # 4.6+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'arch/arm/boot')