diff options
| -rw-r--r-- | .vim/filetype.vim | 1246 |
1 files changed, 444 insertions, 802 deletions
diff --git a/.vim/filetype.vim b/.vim/filetype.vim index 00e8f47..6d26ea0 100644 --- a/.vim/filetype.vim +++ b/.vim/filetype.vim @@ -1,7 +1,7 @@ " Vim support file to detect file types " " Maintainer: Bram Moolenaar <Bram@vim.org> -" Last Change: 2012 Feb 03 +" Last Change: 2020 May 07 " Listen very carefully, I will say this only once if exists("did_load_filetypes") @@ -17,7 +17,7 @@ augroup filetypedetect " Ignored extensions if exists("*fnameescape") -au BufNewFile,BufRead ?\+.orig,?\+.bak,?\+.old,?\+.new,?\+.dpkg-dist,?\+.dpkg-old,?\+.rpmsave,?\+.rpmnew +au BufNewFile,BufRead ?\+.orig,?\+.bak,?\+.old,?\+.new,?\+.dpkg-dist,?\+.dpkg-old,?\+.dpkg-new,?\+.dpkg-bak,?\+.rpmsave,?\+.rpmnew,?\+.pacsave,?\+.pacnew \ exe "doau filetypedetect BufRead " . fnameescape(expand("<afile>:r")) au BufNewFile,BufRead *~ \ let s:name = expand("<afile>") | @@ -42,40 +42,28 @@ endif " Function used for patterns that end in a star: don't set the filetype if the " file name matches ft_ignore_pat. +" When using this, the entry should probably be further down below with the +" other StarSetf() calls. func! s:StarSetf(ft) if expand("<amatch>") !~ g:ft_ignore_pat exe 'setf ' . a:ft endif endfunc +" Vim help file +au BufNewFile,BufRead $VIMRUNTIME/doc/*.txt setf help + " Abaqus or Trasys -au BufNewFile,BufRead *.inp call s:Check_inp() - -func! s:Check_inp() - if getline(1) =~ '^\*' - setf abaqus - else - let n = 1 - if line("$") > 500 - let nmax = 500 - else - let nmax = line("$") - endif - while n <= nmax - if getline(n) =~? "^header surface data" - setf trasys - break - endif - let n = n + 1 - endwhile - endif -endfunc +au BufNewFile,BufRead *.inp call dist#ft#Check_inp() + +" 8th (Firth-derivative) +au BufNewFile,BufRead *.8th setf 8th " A-A-P recipe au BufNewFile,BufRead *.aap setf aap " A2ps printing utility -au BufNewFile,BufRead etc/a2ps.cfg,etc/a2ps/*.cfg,a2psrc,.a2psrc setf a2ps +au BufNewFile,BufRead */etc/a2ps.cfg,*/etc/a2ps/*.cfg,a2psrc,.a2psrc setf a2ps " ABAB/4 au BufNewFile,BufRead *.abap setf abap @@ -106,12 +94,12 @@ au BufNewFile,BufRead *.run setf ampl " Ant au BufNewFile,BufRead build.xml setf ant -" Apache style config file -au BufNewFile,BufRead proftpd.conf* call s:StarSetf('apachestyle') +" Arduino +au BufNewFile,BufRead *.ino,*.pde setf arduino " Apache config file -au BufNewFile,BufRead .htaccess setf apache -au BufNewFile,BufRead httpd.conf*,srm.conf*,access.conf*,apache.conf*,apache2.conf*,/etc/apache2/*.conf* call s:StarSetf('apache') +au BufNewFile,BufRead .htaccess,*/etc/httpd/*.conf setf apache +au BufNewFile,BufRead */etc/apache2/sites-*/*.com setf apache " XA65 MOS6510 cross assembler au BufNewFile,BufRead *.a65 setf a65 @@ -129,12 +117,20 @@ au BufNewFile,BufRead .asoundrc,*/usr/share/alsa/alsa.conf,*/etc/asound.conf set " Arc Macro Language au BufNewFile,BufRead *.aml setf aml +" APT config file +au BufNewFile,BufRead apt.conf setf aptconf +au BufNewFile,BufRead */.aptitude/config setf aptconf +au BufNewFile,BufRead */etc/apt/apt.conf.d/{[-_[:alnum:]]\+,[-_.[:alnum:]]\+.conf} setf aptconf + " Arch Inventory file au BufNewFile,BufRead .arch-inventory,=tagging-method setf arch " ART*Enterprise (formerly ART-IM) au BufNewFile,BufRead *.art setf art +" AsciiDoc +au BufNewFile,BufRead *.asciidoc,*.adoc setf asciidoc + " ASN.1 au BufNewFile,BufRead *.asn,*.asn1 setf asn @@ -161,44 +157,7 @@ au BufNewFile,BufRead */boot/grub/menu.lst,*/boot/grub/grub.conf,*/etc/grub.conf " Assembly (all kinds) " *.lst is not pure assembly, it has two extra columns (address, byte codes) -au BufNewFile,BufRead *.asm,*.[sS],*.[aA],*.mac,*.lst call s:FTasm() - -" This function checks for the kind of assembly that is wanted by the user, or -" can be detected from the first five lines of the file. -func! s:FTasm() - " make sure b:asmsyntax exists - if !exists("b:asmsyntax") - let b:asmsyntax = "" - endif - - if b:asmsyntax == "" - call s:FTasmsyntax() - endif - - " if b:asmsyntax still isn't set, default to asmsyntax or GNU - if b:asmsyntax == "" - if exists("g:asmsyntax") - let b:asmsyntax = g:asmsyntax - else - let b:asmsyntax = "asm" - endif - endif - - exe "setf " . fnameescape(b:asmsyntax) -endfunc - -func! s:FTasmsyntax() - " see if file contains any asmsyntax=foo overrides. If so, change - " b:asmsyntax appropriately - let head = " ".getline(1)." ".getline(2)." ".getline(3)." ".getline(4). - \" ".getline(5)." " - let match = matchstr(head, '\sasmsyntax=\zs[a-zA-Z0-9]\+\ze\s') - if match != '' - let b:asmsyntax = match - elseif ((head =~? '\.title') || (head =~? '\.ident') || (head =~? '\.macro') || (head =~? '\.subtitle') || (head =~? '\.library')) - let b:asmsyntax = "vmasm" - endif -endfunc +au BufNewFile,BufRead *.asm,*.[sS],*.[aA],*.mac,*.lst call dist#ft#FTasm() " Macro (VAX) au BufNewFile,BufRead *.mar setf vmasm @@ -228,20 +187,10 @@ au BufNewFile,BufRead *.awk setf awk au BufNewFile,BufRead *.mch,*.ref,*.imp setf b " BASIC or Visual Basic -au BufNewFile,BufRead *.bas call s:FTVB("basic") - -" Check if one of the first five lines contains "VB_Name". In that case it is -" probably a Visual Basic file. Otherwise it's assumed to be "alt" filetype. -func! s:FTVB(alt) - if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'VB_Name\|Begin VB\.\(Form\|MDIForm\|UserControl\)' - setf vb - else - exe "setf " . a:alt - endif -endfunc +au BufNewFile,BufRead *.bas call dist#ft#FTVB("basic") -" Visual Basic Script (close to Visual Basic) -au BufNewFile,BufRead *.vbs,*.dsm,*.ctl setf vb +" Visual Basic Script (close to Visual Basic) or Visual Basic .NET +au BufNewFile,BufRead *.vb,*.vbs,*.dsm,*.ctl setf vb " IBasic file (similar to QBasic) au BufNewFile,BufRead *.iba,*.ibi setf ibasic @@ -256,14 +205,7 @@ au BufNewFile,BufRead *.cmd \ if getline(1) =~ '^/\*' | setf rexx | else | setf dosbatch | endif " Batch file for 4DOS -au BufNewFile,BufRead *.btm call s:FTbtm() -func! s:FTbtm() - if exists("g:dosbatch_syntax_for_btm") && g:dosbatch_syntax_for_btm - setf dosbatch - else - setf btm - endif -endfunc +au BufNewFile,BufRead *.btm call dist#ft#FTbtm() " BC calculator au BufNewFile,BufRead *.bc setf bc @@ -274,26 +216,16 @@ au BufNewFile,BufRead *.bdf setf bdf " BibTeX bibliography database file au BufNewFile,BufRead *.bib setf bib -" Berkley Packet Filter -au BufRead,BufNewFile *.bpf setf bpf - " BibTeX Bibliography Style au BufNewFile,BufRead *.bst setf bst " BIND configuration -au BufNewFile,BufRead named.conf,rndc.conf setf named +" sudoedit uses namedXXXX.conf +au BufNewFile,BufRead named*.conf,rndc*.conf,rndc*.key setf named " BIND zone au BufNewFile,BufRead named.root setf bindzone -au BufNewFile,BufRead *.db call s:BindzoneCheck('') - -func! s:BindzoneCheck(default) - if getline(1).getline(2).getline(3).getline(4) =~ '^; <<>> DiG [0-9.]\+ <<>>\|BIND.*named\|$ORIGIN\|$TTL\|IN\s\+SOA' - setf bindzone - elseif a:default != '' - exe 'setf ' . a:default - endif -endfunc +au BufNewFile,BufRead *.db call dist#ft#BindzoneCheck('') " Blank au BufNewFile,BufRead *.bl setf blank @@ -301,32 +233,29 @@ au BufNewFile,BufRead *.bl setf blank " Blkid cache file au BufNewFile,BufRead */etc/blkid.tab,*/etc/blkid.tab.old setf xml +" BSDL +au BufNewFile,BufRead *bsd,*.bsdl setf bsdl + +" Bazel (http://bazel.io) +autocmd BufRead,BufNewFile *.bzl,WORKSPACE,BUILD.bazel setf bzl +if has("fname_case") + " There is another check for BUILD further below. + autocmd BufRead,BufNewFile BUILD setf bzl +endif + " C or lpc -au BufNewFile,BufRead *.c call s:FTlpc() - -func! s:FTlpc() - if exists("g:lpc_syntax_for_c") - let lnum = 1 - while lnum <= 12 - if getline(lnum) =~# '^\(//\|inherit\|private\|protected\|nosave\|string\|object\|mapping\|mixed\)' - setf lpc - return - endif - let lnum = lnum + 1 - endwhile - endif - setf c -endfunc +au BufNewFile,BufRead *.c call dist#ft#FTlpc() +au BufNewFile,BufRead *.lpc,*.ulpc setf lpc " Calendar au BufNewFile,BufRead calendar setf calendar -au BufNewFile,BufRead */.calendar/*, - \*/share/calendar/*/calendar.*,*/share/calendar/calendar.* - \ call s:StarSetf('calendar') " C# au BufNewFile,BufRead *.cs setf cs +" CSDL +au BufNewFile,BufRead *.csdl setf csdl + " Cabal au BufNewFile,BufRead *.cabal setf cabal @@ -370,19 +299,7 @@ endif " .h files can be C, Ch C++, ObjC or ObjC++. " Set c_syntax_for_h if you want C, ch_syntax_for_h if you want Ch. ObjC is " detected automatically. -au BufNewFile,BufRead *.h call s:FTheader() - -func! s:FTheader() - if match(getline(1, min([line("$"), 200])), '^@\(interface\|end\|class\)') > -1 - setf objc - elseif exists("g:c_syntax_for_h") - setf c - elseif exists("g:ch_syntax_for_h") - setf ch - else - setf cpp - endif -endfunc +au BufNewFile,BufRead *.h call dist#ft#FTheader() " Ch (CHscript) au BufNewFile,BufRead *.chf setf ch @@ -416,36 +333,7 @@ au BufNewFile,BufRead NEWS au BufNewFile,BufRead *..ch setf chill " Changes for WEB and CWEB or CHILL -au BufNewFile,BufRead *.ch call s:FTchange() - -" This function checks if one of the first ten lines start with a '@'. In -" that case it is probably a change file. -" If the first line starts with # or ! it's probably a ch file. -" If a line has "main", "include", "//" ir "/*" it's probably ch. -" Otherwise CHILL is assumed. -func! s:FTchange() - let lnum = 1 - while lnum <= 10 - if getline(lnum)[0] == '@' - setf change - return - endif - if lnum == 1 && (getline(1)[0] == '#' || getline(1)[0] == '!') - setf ch - return - endif - if getline(lnum) =~ "MODULE" - setf chill - return - endif - if getline(lnum) =~ 'main\s*(\|#\s*include\|//' - setf ch - return - endif - let lnum = lnum + 1 - endwhile - setf chill -endfunc +au BufNewFile,BufRead *.ch call dist#ft#FTchange() " ChordPro au BufNewFile,BufRead *.chopro,*.crd,*.cho,*.crdpro,*.chordpro setf chordpro @@ -457,27 +345,7 @@ au BufNewFile,BufRead *.dcl,*.icl setf clean au BufNewFile,BufRead *.eni setf cl " Clever or dtd -au BufNewFile,BufRead *.ent call s:FTent() - -func! s:FTent() - " This function checks for valid cl syntax in the first five lines. - " Look for either an opening comment, '#', or a block start, '{". - " If not found, assume SGML. - let lnum = 1 - while lnum < 6 - let line = getline(lnum) - if line =~ '^\s*[#{]' - setf cl - return - elseif line !~ '^\s*$' - " Not a blank line, not a comment, and not a block start, - " so doesn't look like valid cl code. - break - endif - let lnum = lnum + 1 - endw - setf dtd -endfunc +au BufNewFile,BufRead *.ent call dist#ft#FTent() " Clipper (or FoxPro; could also be eviews) au BufNewFile,BufRead *.prg @@ -487,6 +355,9 @@ au BufNewFile,BufRead *.prg \ setf clipper | \ endif +" Clojure +au BufNewFile,BufRead *.clj,*.cljs,*.cljx,*.cljc setf clojure + " Cmake au BufNewFile,BufRead CMakeLists.txt,*.cmake,*.cmake.in setf cmake @@ -514,7 +385,10 @@ au BufNewFile,BufRead *.cfm,*.cfi,*.cfc setf cf au BufNewFile,BufRead configure.in,configure.ac setf config " CUDA Cumpute Unified Device Architecture -au BufNewFile,BufRead *.cu setf cuda +au BufNewFile,BufRead *.cu,*.cuh setf cuda + +" Dockerfile; Podman uses the same syntax with name Containerfile +au BufNewFile,BufRead Containerfile,Dockerfile,*.Dockerfile setf dockerfile " WildPackets EtherPeek Decoder au BufNewFile,BufRead *.dcd setf dcd @@ -525,6 +399,12 @@ au BufNewFile,BufRead *enlightenment/*.cfg setf c " Eterm au BufNewFile,BufRead *Eterm/*.cfg setf eterm +" Euphoria 3 or 4 +au BufNewFile,BufRead *.eu,*.ew,*.ex,*.exu,*.exw call dist#ft#EuphoriaCheck() +if has("fname_case") + au BufNewFile,BufRead *.EU,*.EW,*.EX,*.EXU,*.EXW call dist#ft#EuphoriaCheck() +endif + " Lynx config files au BufNewFile,BufRead lynx.cfg setf lynx @@ -548,6 +428,9 @@ au BufNewFile,BufRead *.csp,*.fdr setf csp au BufNewFile,BufRead *.pld setf cupl au BufNewFile,BufRead *.si setf cuplsim +" Dart +au BufRead,BufNewfile *.dart,*.drt setf dart + " Debian Control au BufNewFile,BufRead */debian/control setf debcontrol au BufNewFile,BufRead control @@ -555,6 +438,13 @@ au BufNewFile,BufRead control \| setf debcontrol \| endif +" Debian Copyright +au BufNewFile,BufRead */debian/copyright setf debcopyright +au BufNewFile,BufRead copyright + \ if getline(1) =~ '^Format:' + \| setf debcopyright + \| endif + " Debian Sources.list au BufNewFile,BufRead */etc/apt/sources.list setf debsources au BufNewFile,BufRead */etc/apt/sources.list.d/*.list setf debsources @@ -569,19 +459,7 @@ au BufNewFile,BufRead */etc/dnsmasq.conf setf dnsmasq au BufNewFile,BufRead *.desc setf desc " the D language or dtrace -au BufNewFile,BufRead *.d call s:DtraceCheck() - -func! s:DtraceCheck() - let lines = getline(1, min([line("$"), 100])) - if match(lines, '^module\>\|^import\>') > -1 - " D files often start with a module and/or import statement. - setf d - elseif match(lines, '^#!\S\+dtrace\|#pragma\s\+D\s\+option\|:\S\{-}:\S\{-}:') > -1 - setf dtrace - else - setf d - endif -endfunc +au BufNewFile,BufRead *.d call dist#ft#DtraceCheck() " Desktop files au BufNewFile,BufRead *.desktop,.directory setf desktop @@ -593,7 +471,13 @@ au BufNewFile,BufRead dict.conf,.dictrc setf dictconf au BufNewFile,BufRead dictd.conf setf dictdconf " Diff files -au BufNewFile,BufRead *.diff,*.rej,*.patch setf diff +au BufNewFile,BufRead *.diff,*.rej setf diff +au BufNewFile,BufRead *.patch + \ if getline(1) =~ '^From [0-9a-f]\{40\} Mon Sep 17 00:00:00 2001$' | + \ setf gitsendemail | + \ else | + \ setf diff | + \ endif " Dircolors au BufNewFile,BufRead .dir_colors,.dircolors,*/etc/DIR_COLORS setf dircolors @@ -607,10 +491,10 @@ au BufNewFile,BufRead *.rul \ endif " DCL (Digital Command Language - vms) or DNS zone file -au BufNewFile,BufRead *.com call s:BindzoneCheck('dcl') +au BufNewFile,BufRead *.com call dist#ft#BindzoneCheck('dcl') " DOT -au BufNewFile,BufRead *.dot setf dot +au BufNewFile,BufRead *.dot,*.gv setf dot " Dylan - lid files au BufNewFile,BufRead *.lid setf dylanlid @@ -636,33 +520,30 @@ au BufNewFile,BufRead *.dsl setf dsl " DTD (Document Type Definition for XML) au BufNewFile,BufRead *.dtd setf dtd -" DTS/DTSI (device tree files) +" DTS/DSTI (device tree files) au BufNewFile,BufRead *.dts,*.dtsi setf dts -" EDIF (*.edf,*.edif,*.edn,*.edo) -au BufNewFile,BufRead *.ed\(f\|if\|n\|o\) setf edif +" EDIF (*.edf,*.edif,*.edn,*.edo) or edn +au BufNewFile,BufRead *.ed\(f\|if\|o\) setf edif +au BufNewFile,BufRead *.edn + \ if getline(1) =~ '^\s*(\s*edif\>' | + \ setf edif | + \ else | + \ setf clojure | + \ endif + +" EditorConfig (close enough to dosini) +au BufNewFile,BufRead .editorconfig setf dosini " Embedix Component Description au BufNewFile,BufRead *.ecd setf ecd -" Eiffel or Specman -au BufNewFile,BufRead *.e,*.E call s:FTe() +" Eiffel or Specman or Euphoria +au BufNewFile,BufRead *.e,*.E call dist#ft#FTe() " Elinks configuration au BufNewFile,BufRead */etc/elinks.conf,*/.elinks/elinks.conf setf elinks -func! s:FTe() - let n = 1 - while n < 100 && n < line("$") - if getline(n) =~ "^\\s*\\(<'\\|'>\\)\\s*$" - setf specman - return - endif - let n = n + 1 - endwhile - setf eiffel -endfunc - " ERicsson LANGuage; Yaws is erlang too au BufNewFile,BufRead *.erl,*.hrl,*.yaws setf erlang @@ -714,7 +595,7 @@ au BufNewFile,BufRead auto.master setf conf au BufNewFile,BufRead *.mas,*.master setf master " Forth -au BufNewFile,BufRead *.fs,*.ft setf forth +au BufNewFile,BufRead *.fs,*.ft,*.fth setf forth " Reva Forth au BufNewFile,BufRead *.frt setf reva @@ -741,16 +622,20 @@ au BufNewFile,BufRead *.mo,*.gdmo setf gdmo au BufNewFile,BufRead *.ged,lltxxxxx.txt setf gedcom " Git -au BufNewFile,BufRead *.git/COMMIT_EDITMSG setf gitcommit -au BufNewFile,BufRead *.git/config,.gitconfig,.gitmodules setf gitconfig -au BufNewFile,BufRead *.git/modules/**/COMMIT_EDITMSG setf gitcommit -au BufNewFile,BufRead *.git/modules/**/config setf gitconfig -au BufNewFile,BufRead git-rebase-todo setf gitrebase +au BufNewFile,BufRead COMMIT_EDITMSG,MERGE_MSG,TAG_EDITMSG setf gitcommit +au BufNewFile,BufRead *.git/config,.gitconfig,/etc/gitconfig setf gitconfig +au BufNewFile,BufRead */.config/git/config setf gitconfig +au BufNewFile,BufRead .gitmodules,*.git/modules/*/config setf gitconfig +if !empty($XDG_CONFIG_HOME) + au BufNewFile,BufRead $XDG_CONFIG_HOME/git/config setf gitconfig +endif +au BufNewFile,BufRead git-rebase-todo setf gitrebase +au BufRead,BufNewFile .gitsendemail.msg.?????? setf gitsendemail au BufNewFile,BufRead .msg.[0-9]* \ if getline(1) =~ '^From.*# This line is ignored.$' | \ setf gitsendemail | \ endif -au BufNewFile,BufRead *.git/** +au BufNewFile,BufRead *.git/* \ if getline(1) =~ '^\x\{40\}\>\|^ref: ' | \ setf git | \ endif @@ -764,19 +649,25 @@ au BufNewFile,BufRead *.gp,.gprc setf gp " GPG au BufNewFile,BufRead */.gnupg/options setf gpg au BufNewFile,BufRead */.gnupg/gpg.conf setf gpg -au BufNewFile,BufRead */usr/**/gnupg/options.skel setf gpg +au BufNewFile,BufRead */usr/*/gnupg/options.skel setf gpg +if !empty($GNUPGHOME) + au BufNewFile,BufRead $GNUPGHOME/options setf gpg + au BufNewFile,BufRead $GNUPGHOME/gpg.conf setf gpg +endif " gnash(1) configuration files au BufNewFile,BufRead gnashrc,.gnashrc,gnashpluginrc,.gnashpluginrc setf gnash " Gitolite au BufNewFile,BufRead gitolite.conf setf gitolite -au BufNewFile,BufRead */gitolite-admin/conf/* call s:StarSetf('gitolite') -au BufNewFile,BufRead {,.}gitolite.rc,example.gitolite.rc setf perl +au BufNewFile,BufRead {,.}gitolite.rc,example.gitolite.rc setf perl " Gnuplot scripts au BufNewFile,BufRead *.gpi setf gnuplot +" Go (Google) +au BufNewFile,BufRead *.go setf go + " GrADS scripts au BufNewFile,BufRead *.gs setf grads @@ -784,7 +675,7 @@ au BufNewFile,BufRead *.gs setf grads au BufNewFile,BufRead *.gretl setf gretl " Groovy -au BufNewFile,BufRead *.groovy setf groovy +au BufNewFile,BufRead *.gradle,*.groovy setf groovy " GNU Server Pages au BufNewFile,BufRead *.gsp setf gsp @@ -802,7 +693,7 @@ au BufNewFile,BufRead *.haml setf haml au BufNewFile,BufRead *.hsc,*.hsm setf hamster " Haskell -au BufNewFile,BufRead *.hs setf haskell +au BufNewFile,BufRead *.hs,*.hs-boot setf haskell au BufNewFile,BufRead *.lhs setf lhaskell au BufNewFile,BufRead *.chs setf chaskell @@ -811,33 +702,19 @@ au BufNewFile,BufRead *.ht setf haste au BufNewFile,BufRead *.htpp setf hastepreproc " Hercules -au BufNewFile,BufRead *.vc,*.ev,*.rs,*.sum,*.errsum setf hercules +au BufNewFile,BufRead *.vc,*.ev,*.sum,*.errsum setf hercules " HEX (Intel) au BufNewFile,BufRead *.hex,*.h32 setf hex +" Hollywood +au BufRead,BufNewFile *.hws setf hollywood + " Tilde (must be before HTML) au BufNewFile,BufRead *.t.html setf tilde " HTML (.shtml and .stm for server side) -au BufNewFile,BufRead *.html,*.htm,*.shtml,*.stm call s:FThtml() - -" Distinguish between HTML, XHTML and Django -func! s:FThtml() - let n = 1 - while n < 10 && n < line("$") - if getline(n) =~ '\<DTD\s\+XHTML\s' - setf xhtml - return - endif - if getline(n) =~ '{%\s*\(extends\|block\)\>' - setf htmldjango - return - endif - let n = n + 1 - endwhile - setf html -endfunc +au BufNewFile,BufRead *.html,*.htm,*.shtml,*.stm call dist#ft#FThtml() " HTML with Ruby - eRuby au BufNewFile,BufRead *.erb,*.rhtml setf eruby @@ -845,8 +722,8 @@ au BufNewFile,BufRead *.erb,*.rhtml setf eruby " HTML with M4 au BufNewFile,BufRead *.html.m4 setf htmlm4 -" HTML Cheetah template -au BufNewFile,BufRead *.tmpl setf htmlcheetah +" Some template. Used to be HTML Cheetah. +au BufNewFile,BufRead *.tmpl setf template " Host config au BufNewFile,BufRead */etc/host.conf setf hostconf @@ -857,24 +734,14 @@ au BufNewFile,BufRead */etc/hosts.allow,*/etc/hosts.deny setf hostsaccess " Hyper Builder au BufNewFile,BufRead *.hb setf hb +" Httest +au BufNewFile,BufRead *.htt,*.htb setf httest + " Icon au BufNewFile,BufRead *.icn setf icon " IDL (Interface Description Language) -au BufNewFile,BufRead *.idl call s:FTidl() - -" Distinguish between standard IDL and MS-IDL -func! s:FTidl() - let n = 1 - while n < 50 && n < line("$") - if getline(n) =~ '^\s*import\s\+"\(unknwn\|objidl\)\.idl"' - setf msidl - return - endif - let n = n + 1 - endwhile - setf idl -endfunc +au BufNewFile,BufRead *.idl call dist#ft#FTidl() " Microsoft IDL (Interface Description Language) Also *.idl " MOF = WMI (Windows Management Instrumentation) Managed Object Format @@ -885,25 +752,10 @@ au BufNewFile,BufRead */.icewm/menu setf icemenu " Indent profile (must come before IDL *.pro!) au BufNewFile,BufRead .indent.pro setf indent -au BufNewFile,BufRead indent.pro call s:ProtoCheck('indent') +au BufNewFile,BufRead indent.pro call dist#ft#ProtoCheck('indent') " IDL (Interactive Data Language) -au BufNewFile,BufRead *.pro call s:ProtoCheck('idlang') - -" Distinguish between "default" and Cproto prototype file. */ -func! s:ProtoCheck(default) - " Cproto files have a comment in the first line and a function prototype in - " the second line, it always ends in ";". Indent files may also have - " comments, thus we can't match comments to see the difference. - " IDL files can have a single ';' in the second line, require at least one - " chacter before the ';'. - if getline(2) =~ '.;$' - setf cpp - else - exe 'setf ' . a:default - endif -endfunc - +au BufNewFile,BufRead *.pro call dist#ft#ProtoCheck('idlang') " Indent RC au BufNewFile,BufRead indentrc setf indent @@ -912,7 +764,14 @@ au BufNewFile,BufRead indentrc setf indent au BufNewFile,BufRead *.inf,*.INF setf inform " Initng -au BufNewFile,BufRead */etc/initng/**/*.i,*.ii setf initng +au BufNewFile,BufRead */etc/initng/*/*.i,*.ii setf initng + +" Innovation Data Processing +au BufRead,BufNewFile upstream.dat\c,upstream.*.dat\c,*.upstream.dat\c setf upstreamdat +au BufRead,BufNewFile fdrupstream.log,upstream.log\c,upstream.*.log\c,*.upstream.log\c,UPSTREAM-*.log\c setf upstreamlog +au BufRead,BufNewFile upstreaminstall.log\c,upstreaminstall.*.log\c,*.upstreaminstall.log\c setf upstreaminstalllog +au BufRead,BufNewFile usserver.log\c,usserver.*.log\c,*.usserver.log\c setf usserverlog +au BufRead,BufNewFile usw2kagt.log\c,usw2kagt.*.log\c,*.usw2kagt.log\c setf usw2kagtlog " Ipfilter au BufNewFile,BufRead ipf.conf,ipf6.conf,ipf.rules setf ipfilter @@ -929,6 +788,9 @@ au BufNewFile,BufRead inittab setf inittab " Inno Setup au BufNewFile,BufRead *.iss setf iss +" J +au BufNewFile,BufRead *.ijs setf j + " JAL au BufNewFile,BufRead *.jal,*.JAL setf jal @@ -941,15 +803,17 @@ au BufNewFile,BufRead *.java,*.jav setf java " JavaCC au BufNewFile,BufRead *.jj,*.jjt setf javacc -" JavaScript, ECMAScript -au BufNewFile,BufRead *.js,*.javascript,*.es,*.jsx,*.json setf javascript +" JavaScript, ECMAScript, ES module script, CommonJS script +au BufNewFile,BufRead *.js,*.javascript,*.es,*.mjs,*.cjs setf javascript + +" JavaScript with React +au BufNewFile,BufRead *.jsx setf javascriptreact " Java Server Pages au BufNewFile,BufRead *.jsp setf jsp " Java Properties resource file (note: doesn't catch font.properties.pl) au BufNewFile,BufRead *.properties,*.properties_??,*.properties_??_?? setf jproperties -au BufNewFile,BufRead *.properties_??_??_* call s:StarSetf('jproperties') " Jess au BufNewFile,BufRead *.clp setf jess @@ -960,12 +824,21 @@ au BufNewFile,BufRead *.jgr setf jgraph " Jovial au BufNewFile,BufRead *.jov,*.j73,*.jovial setf jovial +" JSON +au BufNewFile,BufRead *.json,*.jsonp,*.webmanifest setf json + " Kixtart au BufNewFile,BufRead *.kix setf kix " Kimwitu[++] au BufNewFile,BufRead *.k setf kwt +" Kivy +au BufNewFile,BufRead *.kv setf kivy + +" Kotlin +au BufNewFile,BufRead *.kt,*.ktm,*.kts setf kotlin + " KDE script au BufNewFile,BufRead *.ks setf kscript @@ -990,8 +863,11 @@ au BufNewFile,BufRead *.ldif setf ldif " Ld loader au BufNewFile,BufRead *.ld setf ld +" Less +au BufNewFile,BufRead *.less setf less + " Lex -au BufNewFile,BufRead *.lex,*.l setf lex +au BufNewFile,BufRead *.lex,*.l,*.lxx,*.l++ setf lex " Libao au BufNewFile,BufRead */etc/libao.conf,*/.libao setf libao @@ -1027,9 +903,6 @@ au BufNewFile,BufRead *.lite,*.lt setf lite " LiteStep RC files au BufNewFile,BufRead */LiteStep/*/*.rc setf litestep -" Logcheck files -au BufNewFile,BufRead /etc/logcheck/*.d/* setf logcheck - " Login access au BufNewFile,BufRead */etc/login.access setf loginaccess @@ -1048,6 +921,9 @@ au BufNewFile,BufRead *.lou,*.lout setf lout " Lua au BufNewFile,BufRead *.lua setf lua +" Luarocks +au BufNewFile,BufRead *.rockspec setf lua + " Linden Scripting Language (Second Life) au BufNewFile,BufRead *.lsl setf lsl @@ -1061,8 +937,8 @@ au BufNewFile,BufRead *.m4 " MaGic Point au BufNewFile,BufRead *.mgp setf mgp -" Mail (for Elm, trn, mutt, muttng, rn, slrn) -au BufNewFile,BufRead snd.\d\+,.letter,.letter.\d\+,.followup,.article,.article.\d\+,pico.\d\+,mutt{ng,}-*-\w\+,mutt[[:alnum:]_-]\{6\},ae\d\+.txt,/tmp/SLRN[0-9A-Z.]\+,*.eml setf mail +" Mail (for Elm, trn, mutt, muttng, rn, slrn, neomutt) +au BufNewFile,BufRead snd.\d\+,.letter,.letter.\d\+,.followup,.article,.article.\d\+,pico.\d\+,mutt{ng,}-*-\w\+,mutt[[:alnum:]_-]\\\{6\},neomutt-*-\w\+,neomutt[[:alnum:]_-]\\\{6\},ae\d\+.txt,/tmp/SLRN[0-9A-Z.]\+,*.eml setf mail " Mail aliases au BufNewFile,BufRead */etc/mail/aliases,*/etc/aliases setf mailaliases @@ -1076,6 +952,9 @@ au BufNewFile,BufRead *[mM]akefile,*.mk,*.mak,*.dsp setf make " MakeIndex au BufNewFile,BufRead *.ist,*.mst setf ist +" Mallard +au BufNewFile,BufRead *.page setf mallard + " Manpage au BufNewFile,BufRead *.man setf man @@ -1089,38 +968,13 @@ au BufNewFile,BufRead *.mv,*.mpl,*.mws setf maple au BufNewFile,BufRead *.map setf map " Markdown -au BufNewFile,BufRead *.markdown,*.mdown,*.mkd,*.mkdn,README.md setf markdown +au BufNewFile,BufRead *.markdown,*.mdown,*.mkd,*.mkdn,*.mdwn,*.md setf markdown " Mason -au BufNewFile,BufRead *.mason,*.mhtml setf mason - -" Matlab or Objective C -au BufNewFile,BufRead *.m call s:FTm() - -func! s:FTm() - let n = 1 - while n < 10 - let line = getline(n) - if line =~ '^\s*\(#\s*\(include\|import\)\>\|/\*\|//\)' - setf objc - return - endif - if line =~ '^\s*%' - setf matlab - return - endif - if line =~ '^\s*(\*' - setf mma - return - endif - let n = n + 1 - endwhile - if exists("g:filetype_m") - exe "setf " . g:filetype_m - else - setf matlab - endif -endfunc +au BufNewFile,BufRead *.mason,*.mhtml,*.comp setf mason + +" Mathematica, Matlab, Murphi or Objective C +au BufNewFile,BufRead *.m call dist#ft#FTm() " Mathematica notebook au BufNewFile,BufRead *.nb setf mma @@ -1128,9 +982,15 @@ au BufNewFile,BufRead *.nb setf mma " Maya Extension Language au BufNewFile,BufRead *.mel setf mel +" Mercurial (hg) commit file +au BufNewFile,BufRead hg-editor-*.txt setf hgcommit + " Mercurial config (looks like generic config file) au BufNewFile,BufRead *.hgrc,*hgrc setf cfg +" Meson Build system config +au BufNewFile,BufRead meson.build,meson_options.txt setf meson + " Messages (logs mostly) au BufNewFile,BufRead */log/{auth,cron,daemon,debug,kern,lpr,mail,messages,news/news,syslog,user}{,.log,.err,.info,.warn,.crit,.notice}{,.[0-9]*,-[0-9]*} setf messages @@ -1143,30 +1003,15 @@ au BufNewFile,BufRead *.mp setf mp " MGL au BufNewFile,BufRead *.mgl setf mgl +" MIX - Knuth assembly +au BufNewFile,BufRead *.mix,*.mixal setf mix + " MMIX or VMS makefile -au BufNewFile,BufRead *.mms call s:FTmms() +au BufNewFile,BufRead *.mms call dist#ft#FTmms() " Symbian meta-makefile definition (MMP) au BufNewFile,BufRead *.mmp setf mmp -func! s:FTmms() - let n = 1 - while n < 10 - let line = getline(n) - if line =~ '^\s*\(%\|//\)' || line =~ '^\*' - setf mmix - return - endif - if line =~ '^\s*#' - setf make - return - endif - let n = n + 1 - endwhile - setf mmix -endfunc - - " Modsim III (or LambdaProlog) au BufNewFile,BufRead *.mod \ if getline(1) =~ '\<module\>' | @@ -1175,8 +1020,8 @@ au BufNewFile,BufRead *.mod \ setf modsim3 | \ endif -" Modula 2 -au BufNewFile,BufRead *.m2,*.DEF,*.MOD,*.md,*.mi setf modula2 +" Modula 2 (.md removed in favor of Markdown) +au BufNewFile,BufRead *.m2,*.DEF,*.MOD,*.mi setf modula2 " Modula 3 (.m3, .i3, .mg, .ig) au BufNewFile,BufRead *.[mi][3g] setf modula3 @@ -1193,8 +1038,8 @@ au BufNewFile,BufRead */etc/modules.conf,*/etc/modules,*/etc/conf.modules setf m " Mplayer config au BufNewFile,BufRead mplayer.conf,*/.mplayer/config setf mplayerconf -" Moterola S record -au BufNewFile,BufRead *.s19,*.s28,*.s37 setf srec +" Motorola S record +au BufNewFile,BufRead *.s19,*.s28,*.s37,*.mot,*.srec setf srec " Mrxvtrc au BufNewFile,BufRead mrxvtrc,.mrxvtrc setf mrxvtrc @@ -1209,7 +1054,7 @@ au BufNewFile,BufRead *.mysql setf mysql au BufNewFile,BufRead */etc/Muttrc.d/* call s:StarSetf('muttrc') " M$ Resource files -au BufNewFile,BufRead *.rc setf rc +au BufNewFile,BufRead *.rc,*.rch setf rc " MuPAD source au BufRead,BufNewFile *.mu setf mupad @@ -1220,8 +1065,11 @@ au BufNewFile,BufRead *.mush setf mush " Mutt setup file (also for Muttng) au BufNewFile,BufRead Mutt{ng,}rc setf muttrc +" N1QL +au BufRead,BufNewfile *.n1ql,*.nql setf n1ql + " Nano -au BufNewFile,BufRead */etc/nanorc,.nanorc setf nanorc +au BufNewFile,BufRead */etc/nanorc,*.nanorc setf nanorc " Nastran input/DMAP "au BufNewFile,BufRead *.dat setf nastran @@ -1229,6 +1077,9 @@ au BufNewFile,BufRead */etc/nanorc,.nanorc setf nanorc " Natural au BufNewFile,BufRead *.NS[ACGLMNPS] setf natural +" Noemutt setup file +au BufNewFile,BufRead Neomuttrc setf neomuttrc + " Netrc au BufNewFile,BufRead .netrc setf netrc @@ -1244,39 +1095,19 @@ au BufNewFile,BufRead *.me \ setf nroff | \ endif au BufNewFile,BufRead *.tr,*.nr,*.roff,*.tmac,*.mom setf nroff -au BufNewFile,BufRead *.[1-9] call s:FTnroff() - -" This function checks if one of the first five lines start with a dot. In -" that case it is probably an nroff file: 'filetype' is set and 1 is returned. -func! s:FTnroff() - if getline(1)[0] . getline(2)[0] . getline(3)[0] . getline(4)[0] . getline(5)[0] =~ '\.' - setf nroff - return 1 - endif - return 0 -endfunc +au BufNewFile,BufRead *.[1-9] call dist#ft#FTnroff() " Nroff or Objective C++ -au BufNewFile,BufRead *.mm call s:FTmm() - -func! s:FTmm() - let n = 1 - while n < 10 - let line = getline(n) - if line =~ '^\s*\(#\s*\(include\|import\)\>\|/\*\)' - setf objcpp - return - endif - let n = n + 1 - endwhile - setf nroff -endfunc +au BufNewFile,BufRead *.mm call dist#ft#FTmm() " Not Quite C au BufNewFile,BufRead *.nqc setf nqc +" NSE - Nmap Script Engine - uses Lua syntax +au BufNewFile,BufRead *.nse setf lua + " NSIS -au BufNewFile,BufRead *.nsi setf nsis +au BufNewFile,BufRead *.nsi,*.nsh setf nsis " OCAML au BufNewFile,BufRead *.ml,*.mli,*.mll,*.mly,.ocamlinit setf ocaml @@ -1302,6 +1133,9 @@ au BufNewFile,BufRead pf.conf setf pf " Pam conf au BufNewFile,BufRead */etc/pam.conf setf pamconf +" Pam environment +au BufNewFile,BufRead .pam_environment setf pamenv + " PApp au BufNewFile,BufRead *.papp,*.pxml,*.pxsl setf papp @@ -1317,29 +1151,17 @@ au BufNewFile,BufRead *.dpr setf pascal " PDF au BufNewFile,BufRead *.pdf setf pdf +" PCMK - HAE - crm configure edit +au BufNewFile,BufRead *.pcmk setf pcmk + " Perl if has("fname_case") - au BufNewFile,BufRead *.pl,*.PL call s:FTpl() + au BufNewFile,BufRead *.pl,*.PL call dist#ft#FTpl() else - au BufNewFile,BufRead *.pl call s:FTpl() + au BufNewFile,BufRead *.pl call dist#ft#FTpl() endif -au BufNewFile,BufRead *.plx,*.al setf perl -au BufNewFile,BufRead *.p6,*.pm6 setf perl6 - -func! s:FTpl() - if exists("g:filetype_pl") - exe "setf " . g:filetype_pl - else - " recognize Prolog by specific text in the first non-empty line - " require a blank after the '%' because Perl uses "%list" and "%translate" - let l = getline(nextnonblank(1)) - if l =~ '\<prolog\>' || l =~ '^\s*\(%\+\(\s\|$\)\|/\*\)' || l =~ ':-' - setf prolog - else - setf perl - endif - endif -endfunc +au BufNewFile,BufRead *.plx,*.al,*.psgi setf perl +au BufNewFile,BufRead *.p6,*.pm6,*.pl6 setf perl6 " Perl, XPM or XPM2 au BufNewFile,BufRead *.pm @@ -1353,14 +1175,16 @@ au BufNewFile,BufRead *.pm " Perl POD au BufNewFile,BufRead *.pod setf pod +au BufNewFile,BufRead *.pod6 setf pod6 " Php, php3, php4, etc. " Also Phtml (was used for PHP 2 in the past) " Also .ctp for Cake template file au BufNewFile,BufRead *.php,*.php\d,*.phtml,*.ctp setf php -" Pike -au BufNewFile,BufRead *.pike,*.lpc,*.ulpc,*.pmod setf pike +" Pike and Cmod +au BufNewFile,BufRead *.pike,*.pmod setf pike +au BufNewFile,BufRead *.cmod setf cmod " Pinfo config au BufNewFile,BufRead */etc/pinforc,*/.pinforc setf pinfo @@ -1371,6 +1195,13 @@ au BufNewFile,BufRead *.rcp setf pilrc " Pine config au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex setf pine +" Pipenv Pipfiles +au BufNewFile,BufRead Pipfile setf config +au BufNewFile,BufRead Pipfile.lock setf json + +" PL/1, PL/I +au BufNewFile,BufRead *.pli,*.pl1 setf pli + " PL/M (also: *.inp) au BufNewFile,BufRead *.plm,*.p36,*.pac setf plm @@ -1399,29 +1230,7 @@ au BufNewFile,BufRead *.pov setf pov au BufNewFile,BufRead .povrayrc setf povini " Povray, PHP or assembly -au BufNewFile,BufRead *.inc call s:FTinc() - -func! s:FTinc() - if exists("g:filetype_inc") - exe "setf " . g:filetype_inc - else - let lines = getline(1).getline(2).getline(3) - if lines =~? "perlscript" - setf aspperl - elseif lines =~ "<%" - setf aspvbs - elseif lines =~ "<?" - setf php - else - call s:FTasmsyntax() - if exists("b:asmsyntax") - exe "setf " . fnameescape(b:asmsyntax) - else - setf pov - endif - endif - endif -endfunc +au BufNewFile,BufRead *.inc call dist#ft#FTinc() " Printcap and Termcap au BufNewFile,BufRead *printcap @@ -1450,74 +1259,13 @@ au BufNewFile,BufRead *.action setf privoxy au BufNewFile,BufRead .procmail,.procmailrc setf procmail " Progress or CWEB -au BufNewFile,BufRead *.w call s:FTprogress_cweb() - -func! s:FTprogress_cweb() - if exists("g:filetype_w") - exe "setf " . g:filetype_w - return - endif - if getline(1) =~ '&ANALYZE' || getline(3) =~ '&GLOBAL-DEFINE' - setf progress - else - setf cweb - endif -endfunc +au BufNewFile,BufRead *.w call dist#ft#FTprogress_cweb() " Progress or assembly -au BufNewFile,BufRead *.i call s:FTprogress_asm() - -func! s:FTprogress_asm() - if exists("g:filetype_i") - exe "setf " . g:filetype_i - return - endif - " This function checks for an assembly comment the first ten lines. - " If not found, assume Progress. - let lnum = 1 - while lnum <= 10 && lnum < line('$') - let line = getline(lnum) - if line =~ '^\s*;' || line =~ '^\*' - call s:FTasm() - return - elseif line !~ '^\s*$' || line =~ '^/\*' - " Not an empty line: Doesn't look like valid assembly code. - " Or it looks like a Progress /* comment - break - endif - let lnum = lnum + 1 - endw - setf progress -endfunc +au BufNewFile,BufRead *.i call dist#ft#FTprogress_asm() " Progress or Pascal -au BufNewFile,BufRead *.p call s:FTprogress_pascal() - -func! s:FTprogress_pascal() - if exists("g:filetype_p") - exe "setf " . g:filetype_p - return - endif - " This function checks for valid Pascal syntax in the first ten lines. - " Look for either an opening comment or a program start. - " If not found, assume Progress. - let lnum = 1 - while lnum <= 10 && lnum < line('$') - let line = getline(lnum) - if line =~ '^\s*\(program\|unit\|procedure\|function\|const\|type\|var\)\>' - \ || line =~ '^\s*{' || line =~ '^\s*(\*' - setf pascal - return - elseif line !~ '^\s*$' || line =~ '^/\*' - " Not an empty line: Doesn't look like valid Pascal code. - " Or it looks like a Progress /* comment - break - endif - let lnum = lnum + 1 - endw - setf progress -endfunc - +au BufNewFile,BufRead *.p call dist#ft#FTprogress_pascal() " Software Distributor Product Specification File (POSIX 1387.2-1995) au BufNewFile,BufRead *.psf setf psf @@ -1532,17 +1280,18 @@ au BufNewFile,BufRead *.pdb setf prolog " Promela au BufNewFile,BufRead *.pml setf promela +" Google protocol buffers +au BufNewFile,BufRead *.proto setf proto + " Protocols au BufNewFile,BufRead */etc/protocols setf protocols " Pyrex au BufNewFile,BufRead *.pyx,*.pxd setf pyrex -" Python -au BufNewFile,BufRead *.py,*.pyw setf python - +" Python, Python Shell Startup and Python Stub Files " Quixote (Python-based web framework) -au BufNewFile,BufRead *.ptl setf python +au BufNewFile,BufRead *.py,*.pyw,.pythonstartup,.pythonrc,*.ptl,*.pyi setf python " Radiance au BufNewFile,BufRead *.rad,*.mat setf radiance @@ -1563,8 +1312,11 @@ au BufNewFile,BufRead *.reg " Renderman Interface Bytestream au BufNewFile,BufRead *.rib setf rib +" Rego Policy Language +au BufNewFile,BufRead *.rego setf rego + " Rexx -au BufNewFile,BufRead *.rexx,*.rex,*.jrexx,*.rxj,*.orx setf rexx +au BufNewFile,BufRead *.rex,*.orx,*.rxo,*.rxj,*.jrexx,*.rexxj,*.rexx,*.testGroup,*.testUnit setf rexx " R (Splus) if has("fname_case") @@ -1587,41 +1339,22 @@ else au BufNewFile,BufRead *.rnw,*.snw setf rnoweb endif -" Rexx, Rebol or R -au BufNewFile,BufRead *.r,*.R call s:FTr() - -func! s:FTr() - let max = line("$") > 50 ? 50 : line("$") - - for n in range(1, max) - " Rebol is easy to recognize, check for that first - if getline(n) =~? '\<REBOL\>' - setf rebol - return - endif - endfor +" R Markdown file +if has("fname_case") + au BufNewFile,BufRead *.Rmd,*.rmd,*.Smd,*.smd setf rmd +else + au BufNewFile,BufRead *.rmd,*.smd setf rmd +endif - for n in range(1, max) - " R has # comments - if getline(n) =~ '^\s*#' - setf r - return - endif - " Rexx has /* comments */ - if getline(n) =~ '^\s*/\*' - setf rexx - return - endif - endfor +" R reStructuredText file +if has("fname_case") + au BufNewFile,BufRead *.Rrst,*.rrst,*.Srst,*.srst setf rrst +else + au BufNewFile,BufRead *.rrst,*.srst setf rrst +endif - " Nothing recognized, use user default or assume Rexx - if exists("g:filetype_r") - exe "setf " . g:filetype_r - else - " Rexx used to be the default, but R appears to be much more popular. - setf r - endif -endfunc +" Rexx, Rebol or R +au BufNewFile,BufRead *.r,*.R call dist#ft#FTr() " Remind au BufNewFile,BufRead .reminders,*.remind,*.rem setf remind @@ -1632,6 +1365,9 @@ au BufNewFile,BufRead resolv.conf setf resolv " Relax NG Compact au BufNewFile,BufRead *.rnc setf rnc +" Relax NG XML +au BufNewFile,BufRead *.rng setf rng + " RPL/2 au BufNewFile,BufRead *.rpl setf rpl @@ -1656,6 +1392,9 @@ au BufNewFile,BufRead *.rb,*.rbw setf ruby " RubyGems au BufNewFile,BufRead *.gemspec setf ruby +" Rust +au BufNewFile,BufRead *.rs setf rust + " Rackup au BufNewFile,BufRead *.ru setf ruby @@ -1683,6 +1422,12 @@ au BufNewFile,BufRead *.sass setf sass " Sather au BufNewFile,BufRead *.sa setf sather +" Scala +au BufNewFile,BufRead *.scala setf scala + +" SBT - Scala Build Tool +au BufNewFile,BufRead *.sbt setf sbt + " Scilab au BufNewFile,BufRead *.sci,*.sce setf scilab @@ -1698,30 +1443,14 @@ au BufNewFile,BufRead *.sdl,*.pr setf sdl " sed au BufNewFile,BufRead *.sed setf sed -" Sieve (RFC 3028) -au BufNewFile,BufRead *.siv setf sieve +" Sieve (RFC 3028, 5228) +au BufNewFile,BufRead *.siv,*.sieve setf sieve " Sendmail au BufNewFile,BufRead sendmail.cf setf sm " Sendmail .mc files are actually m4. Could also be MS Message text file. -au BufNewFile,BufRead *.mc call s:McSetf() - -func! s:McSetf() - " Rely on the file to start with a comment. - " MS message text files use ';', Sendmail files use '#' or 'dnl' - for lnum in range(1, min([line("$"), 20])) - let line = getline(lnum) - if line =~ '^\s*\(#\|dnl\)' - setf m4 " Sendmail .mc file - return - elseif line =~ '^\s*;' - setf msmessages " MS Message text file - return - endif - endfor - setf m4 " Default: Sendmail .mc file -endfunc +au BufNewFile,BufRead *.mc call dist#ft#McSetf() " Services au BufNewFile,BufRead */etc/services setf services @@ -1743,7 +1472,8 @@ au BufNewFile,BufRead *.sgm,*.sgml \ if getline(1).getline(2).getline(3).getline(4).getline(5) =~? 'linuxdoc' | \ setf sgmllnx | \ elseif getline(1) =~ '<!DOCTYPE.*DocBook' || getline(2) =~ '<!DOCTYPE.*DocBook' | - \ let b:docbk_type="sgml" | + \ let b:docbk_type = "sgml" | + \ let b:docbk_ver = 4 | \ setf docbk | \ else | \ setf sgml | @@ -1757,101 +1487,37 @@ au BufNewFile,BufRead *.decl,*.dcl,*.dec " SGML catalog file au BufNewFile,BufRead catalog setf catalog -au BufNewFile,BufRead sgml.catalog* call s:StarSetf('catalog') " Shell scripts (sh, ksh, bash, bash2, csh); Allow .profile_foo etc. -" Gentoo ebuilds are actually bash scripts -au BufNewFile,BufRead .bashrc*,bashrc,bash.bashrc,.bash_profile*,.bash_logout*,*.bash,*.ebuild call SetFileTypeSH("bash") -au BufNewFile,BufRead .kshrc*,*.ksh call SetFileTypeSH("ksh") -au BufNewFile,BufRead */etc/profile,.profile*,*.sh,*.env call SetFileTypeSH(getline(1)) - -" Also called from scripts.vim. -func! SetFileTypeSH(name) - if expand("<amatch>") =~ g:ft_ignore_pat - return - endif - if a:name =~ '\<csh\>' - " Some .sh scripts contain #!/bin/csh. - call SetFileTypeShell("csh") - return - elseif a:name =~ '\<tcsh\>' - " Some .sh scripts contain #!/bin/tcsh. - call SetFileTypeShell("tcsh") - return - elseif a:name =~ '\<ksh\>' - let b:is_kornshell = 1 - if exists("b:is_bash") - unlet b:is_bash - endif - if exists("b:is_sh") - unlet b:is_sh - endif - elseif exists("g:bash_is_sh") || a:name =~ '\<bash\>' || a:name =~ '\<bash2\>' - let b:is_bash = 1 - if exists("b:is_kornshell") - unlet b:is_kornshell - endif - if exists("b:is_sh") - unlet b:is_sh - endif - elseif a:name =~ '\<sh\>' - let b:is_sh = 1 - if exists("b:is_kornshell") - unlet b:is_kornshell - endif - if exists("b:is_bash") - unlet b:is_bash - endif - endif - call SetFileTypeShell("sh") -endfunc +" Gentoo ebuilds and Arch Linux PKGBUILDs are actually bash scripts +" NOTE: Patterns ending in a star are further down, these have lower priority. +au BufNewFile,BufRead .bashrc,bashrc,bash.bashrc,.bash[_-]profile,.bash[_-]logout,.bash[_-]aliases,bash-fc[-.],*.bash,*/{,.}bash[_-]completion{,.d,.sh}{,/*},*.ebuild,*.eclass,PKGBUILD call dist#ft#SetFileTypeSH("bash") +au BufNewFile,BufRead .kshrc,*.ksh call dist#ft#SetFileTypeSH("ksh") +au BufNewFile,BufRead */etc/profile,.profile,*.sh,*.env call dist#ft#SetFileTypeSH(getline(1)) -" For shell-like file types, check for an "exec" command hidden in a comment, -" as used for Tcl. -" Also called from scripts.vim, thus can't be local to this script. -func! SetFileTypeShell(name) - if expand("<amatch>") =~ g:ft_ignore_pat - return - endif - let l = 2 - while l < 20 && l < line("$") && getline(l) =~ '^\s*\(#\|$\)' - " Skip empty and comment lines. - let l = l + 1 - endwhile - if l < line("$") && getline(l) =~ '\s*exec\s' && getline(l - 1) =~ '^\s*#.*\\$' - " Found an "exec" line after a comment with continuation - let n = substitute(getline(l),'\s*exec\s\+\([^ ]*/\)\=', '', '') - if n =~ '\<tclsh\|\<wish' - setf tcl - return - endif - endif - exe "setf " . a:name -endfunc -" tcsh scripts -au BufNewFile,BufRead .tcshrc*,*.tcsh,tcsh.tcshrc,tcsh.login call SetFileTypeShell("tcsh") +" Shell script (Arch Linux) or PHP file (Drupal) +au BufNewFile,BufRead *.install + \ if getline(1) =~ '<?php' | + \ setf php | + \ else | + \ call dist#ft#SetFileTypeSH("bash") | + \ endif + +" tcsh scripts (patterns ending in a star further below) +au BufNewFile,BufRead .tcshrc,*.tcsh,tcsh.tcshrc,tcsh.login call dist#ft#SetFileTypeShell("tcsh") " csh scripts, but might also be tcsh scripts (on some systems csh is tcsh) -au BufNewFile,BufRead .login*,.cshrc*,csh.cshrc,csh.login,csh.logout,*.csh,.alias call s:CSH() - -func! s:CSH() - if exists("g:filetype_csh") - call SetFileTypeShell(g:filetype_csh) - elseif &shell =~ "tcsh" - call SetFileTypeShell("tcsh") - else - call SetFileTypeShell("csh") - endif -endfunc +" (patterns ending in a start further below) +au BufNewFile,BufRead .login,.cshrc,csh.cshrc,csh.login,csh.logout,*.csh,.alias call dist#ft#CSH() -" Z-Shell script +" Z-Shell script (patterns ending in a star further below) au BufNewFile,BufRead .zprofile,*/etc/zprofile,.zfbfmarks setf zsh -au BufNewFile,BufRead .zsh*,.zlog*,.zcompdump* call s:StarSetf('zsh') +au BufNewFile,BufRead .zshrc,.zshenv,.zlogin,.zlogout,.zcompdump setf zsh au BufNewFile,BufRead *.zsh setf zsh " Scheme -au BufNewFile,BufRead *.scm,*.ss setf scheme +au BufNewFile,BufRead *.scm,*.ss,*.rkt setf scheme " Screen RC au BufNewFile,BufRead .screenrc,screenrc setf screen @@ -1878,6 +1544,8 @@ au BufNewFile,BufRead *.st setf st au BufNewFile,BufRead *.cls \ if getline(1) =~ '^%' | \ setf tex | + \ elseif getline(1)[0] == '#' && getline(1) =~ 'rexx' | + \ setf rexx | \ else | \ setf st | \ endif @@ -1912,38 +1580,7 @@ au BufNewFile,BufRead *.mib,*.my setf mib " Snort Configuration au BufNewFile,BufRead *.hog,snort.conf,vision.conf setf hog -au BufNewFile,BufRead *.rules call s:FTRules() - -let s:ft_rules_udev_rules_pattern = '^\s*\cudev_rules\s*=\s*"\([^"]\{-1,}\)/*".*' -func! s:FTRules() - let path = expand('<amatch>:p') - if path =~ '^/\(etc/udev/\%(rules\.d/\)\=.*\.rules\|lib/udev/\%(rules\.d/\)\=.*\.rules\)$' - setf udevrules - return - endif - if path =~ '^/etc/ufw/' - setf conf " Better than hog - return - endif - try - let config_lines = readfile('/etc/udev/udev.conf') - catch /^Vim\%((\a\+)\)\=:E484/ - setf hog - return - endtry - let dir = expand('<amatch>:p:h') - for line in config_lines - if line =~ s:ft_rules_udev_rules_pattern - let udev_rules = substitute(line, s:ft_rules_udev_rules_pattern, '\1', "") - if dir == udev_rules - setf udevrules - endif - break - endif - endfor - setf hog -endfunc - +au BufNewFile,BufRead *.rules call dist#ft#FTRules() " Spec (Linux RPM) au BufNewFile,BufRead *.spec setf spec @@ -1967,15 +1604,7 @@ au BufNewFile,BufRead squid.conf setf squid au BufNewFile,BufRead *.tyb,*.typ,*.tyc,*.pkb,*.pks setf sql " SQL -au BufNewFile,BufRead *.sql call s:SQL() - -func! s:SQL() - if exists("g:filetype_sql") - exe "setf " . g:filetype_sql - else - setf sql - endif -endfunc +au BufNewFile,BufRead *.sql call dist#ft#SQL() " SQLJ au BufNewFile,BufRead *.sqlj setf sqlj @@ -1990,7 +1619,10 @@ au BufNewFile,BufRead ssh_config,*/.ssh/config setf sshconfig au BufNewFile,BufRead sshd_config setf sshdconfig " Stata -au BufNewFile,BufRead *.ado,*.class,*.do,*.imata,*.mata setf stata +au BufNewFile,BufRead *.ado,*.do,*.imata,*.mata setf stata +" Also *.class, but not when it's a Java bytecode file +au BufNewFile,BufRead *.class + \ if getline(1) !~ "^\xca\xfe\xba\xbe" | setf stata | endif " SMCL au BufNewFile,BufRead *.hlp,*.ihlp,*.smcl setf smcl @@ -2004,9 +1636,27 @@ au BufNewFile,BufRead *.sml setf sml " Sratus VOS command macro au BufNewFile,BufRead *.cm setf voscm +" Swift +au BufNewFile,BufRead *.swift setf swift +au BufNewFile,BufRead *.swift.gyb setf swiftgyb + +" Swift Intermediate Language +au BufNewFile,BufRead *.sil setf sil + " Sysctl au BufNewFile,BufRead */etc/sysctl.conf,*/etc/sysctl.d/*.conf setf sysctl +" Systemd unit files +au BufNewFile,BufRead */systemd/*.{automount,mount,path,service,socket,swap,target,timer} setf systemd +" Systemd overrides +au BufNewFile,BufRead */etc/systemd/system/*.d/*.conf setf systemd +au BufNewFile,BufRead */.config/systemd/user/*.d/*.conf setf systemd +" Systemd temp files +au BufNewFile,BufRead */etc/systemd/system/*.d/.#* setf systemd +au BufNewFile,BufRead */etc/systemd/system/.#* setf systemd +au BufNewFile,BufRead */.config/systemd/user/*.d/.#* setf systemd +au BufNewFile,BufRead */.config/systemd/user/.#* setf systemd + " Synopsys Design Constraints au BufNewFile,BufRead *.sdc setf sdc @@ -2016,31 +1666,9 @@ au BufNewFile,BufRead */etc/sudoers,sudoers.tmp setf sudoers " SVG (Scalable Vector Graphics) au BufNewFile,BufRead *.svg setf svg -" If the file has an extension of 't' and is in a directory 't' then it is -" almost certainly a Perl test file. -" If the first line starts with '#' and contains 'perl' it's probably a Perl -" file. -" (Slow test) If a file contains a 'use' statement then it is almost certainly -" a Perl file. -func! s:FTperl() - if expand("%:e") == 't' && expand("%:p:h:t") == 't' - setf perl - return 1 - endif - if getline(1)[0] == '#' && getline(1) =~ 'perl' - setf perl - return 1 - endif - if search('^use\s\s*\k', 'nc', 30) - setf perl - return 1 - endif - return 0 -endfunc - " Tads (or Nroff or Perl test file) au BufNewFile,BufRead *.t - \ if !s:FTnroff() && !s:FTperl() | setf tads | endif + \ if !dist#ft#FTnroff() && !dist#ft#FTperl() | setf tads | endif " Tags au BufNewFile,BufRead tags setf tags @@ -2050,7 +1678,7 @@ au BufNewFile,BufRead *.tak setf tak " Task au BufRead,BufNewFile {pending,completed,undo}.data setf taskdata -au BufRead,BufNewFile *.task setf taskedit +au BufRead,BufNewFile *.task setf taskedit " Tcl (JACL too) au BufNewFile,BufRead *.tcl,*.tk,*.itcl,*.itk,*.jacl setf tcl @@ -2061,67 +1689,18 @@ au BufNewFile,BufRead *.tli setf tli " Telix Salt au BufNewFile,BufRead *.slt setf tsalt +" Tera Term Language +au BufRead,BufNewFile *.ttl setf teraterm + " Terminfo au BufNewFile,BufRead *.ti setf terminfo " TeX au BufNewFile,BufRead *.latex,*.sty,*.dtx,*.ltx,*.bbl setf tex -au BufNewFile,BufRead *.tex call s:FTtex() - -" Choose context, plaintex, or tex (LaTeX) based on these rules: -" 1. Check the first line of the file for "%&<format>". -" 2. Check the first 1000 non-comment lines for LaTeX or ConTeXt keywords. -" 3. Default to "latex" or to g:tex_flavor, can be set in user's vimrc. -func! s:FTtex() - let firstline = getline(1) - if firstline =~ '^%&\s*\a\+' - let format = tolower(matchstr(firstline, '\a\+')) - let format = substitute(format, 'pdf', '', '') - if format == 'tex' - let format = 'plain' - endif - else - " Default value, may be changed later: - let format = exists("g:tex_flavor") ? g:tex_flavor : 'plain' - " Save position, go to the top of the file, find first non-comment line. - let save_cursor = getpos('.') - call cursor(1,1) - let firstNC = search('^\s*[^[:space:]%]', 'c', 1000) - if firstNC " Check the next thousand lines for a LaTeX or ConTeXt keyword. - let lpat = 'documentclass\>\|usepackage\>\|begin{\|newcommand\>\|renewcommand\>\|part\>\|chapter\>\|section\>\|subsection\>\|subsubsection\>\|paragraph\>\|subparagraph\>\|subsubparagraph' - let cpat = 'start\a\+\|setup\a\+\|usemodule\|enablemode\|enableregime\|setvariables\|useencoding\|usesymbols\|stelle\a\+\|verwende\a\+\|stel\a\+\|gebruik\a\+\|usa\a\+\|imposta\a\+\|regle\a\+\|utilisemodule\>' - let kwline = search('^\s*\\\%(' . lpat . '\)\|^\s*\\\(' . cpat . '\)', - \ 'cnp', firstNC + 1000) - if kwline == 1 " lpat matched - let format = 'latex' - elseif kwline == 2 " cpat matched - let format = 'context' - endif " If neither matched, keep default set above. - " let lline = search('^\s*\\\%(' . lpat . '\)', 'cn', firstNC + 1000) - " let cline = search('^\s*\\\%(' . cpat . '\)', 'cn', firstNC + 1000) - " if cline > 0 - " let format = 'context' - " endif - " if lline > 0 && (cline == 0 || cline > lline) - " let format = 'tex' - " endif - endif " firstNC - call setpos('.', save_cursor) - endif " firstline =~ '^%&\s*\a\+' - - " Translation from formats to file types. TODO: add AMSTeX, RevTex, others? - if format == 'plain' - setf plaintex - elseif format == 'context' - setf context - else " probably LaTeX - setf tex - endif - return -endfunc +au BufNewFile,BufRead *.tex call dist#ft#FTtex() " ConTeXt -au BufNewFile,BufRead tex/context/*/*.tex,*.mkii,*.mkiv setf context +au BufNewFile,BufRead *.mkii,*.mkiv,*.mkvi setf context " Texinfo au BufNewFile,BufRead *.texinfo,*.texi,*.txi setf texinfo @@ -2135,6 +1714,9 @@ au BufNewFile,BufRead .tidyrc,tidyrc setf tidy " TF mud client au BufNewFile,BufRead *.tf,.tfrc,tfrc setf tf +" tmux configuration +au BufNewFile,BufRead {.,}tmux*.conf setf tmux + " TPP - Text Presentation Program au BufNewFile,BufReadPost *.tpp setf tpp @@ -2153,6 +1735,15 @@ au BufNewFile,BufReadPost *.tssop setf tssop " TSS - Command Line (temporary) au BufNewFile,BufReadPost *.tsscl setf tsscl +" TWIG files +au BufNewFile,BufReadPost *.twig setf twig + +" Typescript +au BufNewFile,BufReadPost *.ts setf typescript + +" TypeScript with React +au BufNewFile,BufRead *.tsx setf typescriptreact + " Motif UIT/UIL files au BufNewFile,BufRead *.uit,*.uil setf uil @@ -2172,8 +1763,12 @@ au BufNewFile,BufRead *.uc setf uc au BufNewFile,BufRead */etc/updatedb.conf setf updatedb " Upstart (init(8)) config files -au BufNewFile,BufRead */etc/init/*.conf,*/.init/*.conf setf upstart -au BufNewFile,BufRead */etc/init/*.override,*/.init/*.override setf upstart +au BufNewFile,BufRead */usr/share/upstart/*.conf setf upstart +au BufNewFile,BufRead */usr/share/upstart/*.override setf upstart +au BufNewFile,BufRead */etc/init/*.conf,*/etc/init/*.override setf upstart +au BufNewFile,BufRead */.init/*.conf,*/.init/*.override setf upstart +au BufNewFile,BufRead */.config/upstart/*.conf setf upstart +au BufNewFile,BufRead */.config/upstart/*.override setf upstart " Vera au BufNewFile,BufRead *.vr,*.vri,*.vrh setf vera @@ -2184,12 +1779,11 @@ au BufNewFile,BufRead *.v setf verilog " Verilog-AMS HDL au BufNewFile,BufRead *.va,*.vams setf verilogams -" VHDL -au BufNewFile,BufRead *.hdl,*.vhd,*.vhdl,*.vbe,*.vst setf vhdl -au BufNewFile,BufRead *.vhdl_[0-9]* call s:StarSetf('vhdl') +" SystemVerilog +au BufNewFile,BufRead *.sv,*.svh setf systemverilog -" System Verilog -au BufNewFile,BufRead *.sv setf systemverilog +" VHDL +au BufNewFile,BufRead *.hdl,*.vhd,*.vhdl,*.vbe,*.vst,*.vho setf vhdl " Vim script au BufNewFile,BufRead *.vim,*.vba,.exrc,_exrc setf vim @@ -2206,7 +1800,7 @@ au BufRead,BufNewFile *.hw,*.module,*.pkg \ endif " Visual Basic (also uses *.bas) or FORM -au BufNewFile,BufRead *.frm call s:FTVB("form") +au BufNewFile,BufRead *.frm call dist#ft#FTVB("form") " SaxBasic is close to Visual Basic au BufNewFile,BufRead *.sba setf vb @@ -2217,6 +1811,15 @@ au BufNewFile,BufRead vgrindefs setf vgrindefs " VRML V1.0c au BufNewFile,BufRead *.wrl setf vrml +" Vroom (vim testing and executable documentation) +au BufNewFile,BufRead *.vroom setf vroom + +" Vue.js Single File Component +au BufNewFile,BufRead *.vue setf vue + +" WebAssembly +au BufNewFile,BufRead *.wast,*.wat setf wast + " Webmacro au BufNewFile,BufRead *.wm setf webmacro @@ -2232,6 +1835,9 @@ au BufNewFile,BufRead *.wbt setf winbatch " WSML au BufNewFile,BufRead *.wsml setf wsml +" WPL +au BufNewFile,BufRead *.wpl setf xml + " WvDial au BufNewFile,BufRead wvdial.conf,.wvdialrc setf wvdial @@ -2290,28 +1896,10 @@ au BufNewFile,BufRead .Xdefaults,.Xpdefaults,.Xresources,xdm-config,*.ad setf xd " Xmath au BufNewFile,BufRead *.msc,*.msf setf xmath au BufNewFile,BufRead *.ms - \ if !s:FTnroff() | setf xmath | endif + \ if !dist#ft#FTnroff() | setf xmath | endif " XML specific variants: docbk and xbl -au BufNewFile,BufRead *.xml call s:FTxml() - -func! s:FTxml() - let n = 1 - while n < 100 && n < line("$") - let line = getline(n) - if line =~ '<!DOCTYPE.*DocBook' - let b:docbk_type = "xml" - setf docbk - return - endif - if line =~ 'xmlns:xbl="http://www.mozilla.org/xbl"' - setf xbl - return - endif - let n += 1 - endwhile - setf xml -endfunc +au BufNewFile,BufRead *.xml call dist#ft#FTxml() " XMI (holding UML models) is also XML au BufNewFile,BufRead *.xmi setf xml @@ -2320,7 +1908,8 @@ au BufNewFile,BufRead *.xmi setf xml au BufNewFile,BufRead *.csproj,*.csproj.user setf xml " Qt Linguist translation source and Qt User Interface Files are XML -au BufNewFile,BufRead *.ts,*.ui setf xml +" However, for .ts Typescript is more common. +au BufNewFile,BufRead *.ui setf xml " TPM's are RDF-based descriptions of TeX packages (Nikolai Weibull) au BufNewFile,BufRead *.tpm setf xml @@ -2331,10 +1920,16 @@ au BufNewFile,BufRead */etc/xdg/menus/*.menu setf xml " ATI graphics driver configuration au BufNewFile,BufRead fglrxrc setf xml +" Web Services Description Language (WSDL) +au BufNewFile,BufRead *.wsdl setf xml + " XLIFF (XML Localisation Interchange File Format) is also XML au BufNewFile,BufRead *.xlf setf xml au BufNewFile,BufRead *.xliff setf xml +" XML User Interface Language +au BufNewFile,BufRead *.xul setf xml + " X11 xmodmap (also see below) au BufNewFile,BufRead *Xmodmap setf xmodmap @@ -2348,41 +1943,31 @@ au BufNewFile,BufRead *.xsd setf xsd au BufNewFile,BufRead *.xsl,*.xslt setf xslt " Yacc -au BufNewFile,BufRead *.yy setf yacc +au BufNewFile,BufRead *.yy,*.yxx,*.y++ setf yacc " Yacc or racc -au BufNewFile,BufRead *.y call s:FTy() - -func! s:FTy() - let n = 1 - while n < 100 && n < line("$") - let line = getline(n) - if line =~ '^\s*%' - setf yacc - return - endif - if getline(n) =~ '^\s*\(#\|class\>\)' && getline(n) !~ '^\s*#\s*include' - setf racc - return - endif - let n = n + 1 - endwhile - setf yacc -endfunc - +au BufNewFile,BufRead *.y call dist#ft#FTy() " Yaml au BufNewFile,BufRead *.yaml,*.yml setf yaml +" Raml +au BufNewFile,BufRead *.raml setf raml + " yum conf (close enough to dosini) -au BufNewFile,BufRead */etc/yum.conf setf dosini +au BufNewFile,BufRead */etc/yum.conf setf dosini + +" Zimbu +au BufNewFile,BufRead *.zu setf zimbu +" Zimbu Templates +au BufNewFile,BufRead *.zut setf zimbutempl " Zope " dtml (zope dynamic template markup language), pt (zope page template), " cpt (zope form controller page template) -au BufNewFile,BufRead *.dtml,*.pt,*.cpt call s:FThtml() +au BufNewFile,BufRead *.dtml,*.pt,*.cpt call dist#ft#FThtml() " zsql (zope sql method) -au BufNewFile,BufRead *.zsql call s:SQL() +au BufNewFile,BufRead *.zsql call dist#ft#SQL() " Z80 assembler asz80 au BufNewFile,BufRead *.z8a setf z8a @@ -2413,6 +1998,10 @@ au StdinReadPost * if !did_filetype() | runtime! scripts.vim | endif " Most of these should call s:StarSetf() to avoid names ending in .gz and the " like are used. +" More Apache style config files +au BufNewFile,BufRead */etc/proftpd/*.conf*,*/etc/proftpd/conf.*/* call s:StarSetf('apachestyle') +au BufNewFile,BufRead proftpd.conf* call s:StarSetf('apachestyle') + " More Apache config files au BufNewFile,BufRead access.conf*,apache.conf*,apache2.conf*,httpd.conf*,srm.conf* call s:StarSetf('apache') au BufNewFile,BufRead */etc/apache2/*.conf*,*/etc/apache2/conf.*/*,*/etc/apache2/mods-*/*,*/etc/apache2/sites-*/*,*/etc/httpd/conf.d/*.conf* call s:StarSetf('apache') @@ -2424,6 +2013,11 @@ au BufNewFile,BufRead *asterisk*/*voicemail.conf* call s:StarSetf('asteriskvm') " Bazaar version control au BufNewFile,BufRead bzr_log.* setf bzr +" Bazel build file +if !has("fname_case") + au BufNewFile,BufRead BUILD setf bzl +endif + " BIND zone au BufNewFile,BufRead */named/db.*,*/bind/db.* call s:StarSetf('bindzone') @@ -2463,6 +2057,12 @@ au BufNewFile,BufRead *fvwm2rc* " Gedcom au BufNewFile,BufRead */tmp/lltmp* call s:StarSetf('gedcom') +" Git +au BufNewFile,BufRead */.gitconfig.d/*,/etc/gitconfig.d/* call s:StarSetf('gitconfig') + +" Gitolite +au BufNewFile,BufRead */gitolite-admin/conf/* call s:StarSetf('gitolite') + " GTK RC au BufNewFile,BufRead .gtkrc*,gtkrc* call s:StarSetf('gtkrc') @@ -2475,6 +2075,9 @@ au! BufNewFile,BufRead *jarg* \| call s:StarSetf('jargon') \|endif +" Java Properties resource file (note: doesn't catch font.properties.pl) +au BufNewFile,BufRead *.properties_??_??_* call s:StarSetf('jproperties') + " Kconfig au BufNewFile,BufRead Kconfig.* call s:StarSetf('kconfig') @@ -2491,7 +2094,9 @@ au BufNewFile,BufRead [mM]akefile* call s:StarSetf('make') au BufNewFile,BufRead [rR]akefile* call s:StarSetf('ruby') " Mail (also matches muttrc.vim, so this is below the other checks) -au BufNewFile,BufRead mutt[[:alnum:]._-]\{6\} setf mail +au BufNewFile,BufRead {neo,}mutt[[:alnum:]._-]\\\{6\} setf mail + +au BufNewFile,BufRead reportbug-* call s:StarSetf('mail') " Modconf au BufNewFile,BufRead */etc/modutils/* @@ -2504,9 +2109,16 @@ au BufNewFile,BufRead */etc/modprobe.* call s:StarSetf('modconf') au BufNewFile,BufRead .mutt{ng,}rc*,*/.mutt{ng,}/mutt{ng,}rc* call s:StarSetf('muttrc') au BufNewFile,BufRead mutt{ng,}rc*,Mutt{ng,}rc* call s:StarSetf('muttrc') +" Neomutt setup file +au BufNewFile,BufRead .neomuttrc*,*/.neomutt/neomuttrc* call s:StarSetf('neomuttrc') +au BufNewFile,BufRead neomuttrc*,Neomuttrc* call s:StarSetf('neomuttrc') + " Nroff macros au BufNewFile,BufRead tmac.* call s:StarSetf('nroff') +" OpenBSD hostname.if +au BufNewFile,BufRead /etc/hostname.* call s:StarSetf('config') + " Pam conf au BufNewFile,BufRead */etc/pam.d/* call s:StarSetf('pamconf') @@ -2520,9 +2132,30 @@ au BufNewFile,BufRead *termcap* \| let b:ptcap_type = "term" | call s:StarSetf('ptcap') \|endif +" ReDIF +" Only used when the .rdf file was not detected to be XML. +au BufRead,BufNewFile *.rdf call dist#ft#Redif() + " Remind au BufNewFile,BufRead .reminders* call s:StarSetf('remind') +" SGML catalog file +au BufNewFile,BufRead sgml.catalog* call s:StarSetf('catalog') + +" Shell scripts ending in a star +au BufNewFile,BufRead .bashrc*,.bash[_-]profile*,.bash[_-]logout*,.bash[_-]aliases*,bash-fc[-.]*,,PKGBUILD* call dist#ft#SetFileTypeSH("bash") +au BufNewFile,BufRead .kshrc* call dist#ft#SetFileTypeSH("ksh") +au BufNewFile,BufRead .profile* call dist#ft#SetFileTypeSH(getline(1)) + +" tcsh scripts ending in a star +au BufNewFile,BufRead .tcshrc* call dist#ft#SetFileTypeShell("tcsh") + +" csh scripts ending in a star +au BufNewFile,BufRead .login*,.cshrc* call dist#ft#CSH() + +" VHDL +au BufNewFile,BufRead *.vhdl_[0-9]* call s:StarSetf('vhdl') + " Vim script au BufNewFile,BufRead *vimrc* call s:StarSetf('vim') @@ -2548,32 +2181,41 @@ au BufNewFile,BufRead *xmodmap* call s:StarSetf('xmodmap') au BufNewFile,BufRead */etc/xinetd.d/* call s:StarSetf('xinetd') " yum conf (close enough to dosini) -au BufNewFile,BufRead */etc/yum.repos.d/* call s:StarSetf('dosini') +au BufNewFile,BufRead */etc/yum.repos.d/* call s:StarSetf('dosini') -" Z-Shell script +" Z-Shell script ending in a star +au BufNewFile,BufRead .zsh*,.zlog*,.zcompdump* call s:StarSetf('zsh') au BufNewFile,BufRead zsh*,zlog* call s:StarSetf('zsh') " Plain text files, needs to be far down to not override others. This avoids " the "conf" type being used if there is a line starting with '#'. -au BufNewFile,BufRead *.txt,*.text setf text +au BufNewFile,BufRead *.text,README setf text + +" Help files match *.txt but should have a last line that is a modeline. +au BufNewFile,BufRead *.txt + \ if getline('$') !~ 'vim:.*ft=help' + \| setf text + \| endif " Use the filetype detect plugins. They may overrule any of the previously " detected filetypes. runtime! ftdetect/*.vim +" NOTE: The above command could have ended the filetypedetect autocmd group +" and started another one. Let's make sure it has ended to get to a consistent +" state. +augroup END -" Generic configuration file (check this last, it's just guessing!) -au BufNewFile,BufRead,StdinReadPost * +" Generic configuration file. Use FALLBACK, it's just guessing! +au filetypedetect BufNewFile,BufRead,StdinReadPost * \ if !did_filetype() && expand("<amatch>") !~ g:ft_ignore_pat \ && (getline(1) =~ '^#' || getline(2) =~ '^#' || getline(3) =~ '^#' \ || getline(4) =~ '^#' || getline(5) =~ '^#') | - \ setf conf | + \ setf FALLBACK conf | \ endif -augroup END - " If the GUI is already running, may still need to install the Syntax menu. " Don't do it when the 'M' flag is included in 'guioptions'. |