summaryrefslogtreecommitdiff
path: root/tools/perf/pmu-events/arch/x86/haswell/pipeline.json
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-02-07 12:10:57 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-02-07 12:10:57 -0800
commit926af6273fc683cd98cd0ce7bf0d04a02eed6742 (patch)
tree99c40d2bc42563a92c2877e58e32a6b4c922ba30 /tools/perf/pmu-events/arch/x86/haswell/pipeline.json
parentb6789123bccba8b5feb9901ed2e8c3c39181979d (diff)
parent912964eacb111551db73429719eb5fadcab0ff8a (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) Load correct firmware in rtl8192ce wireless driver, from Jurij Smakov. 2) Fix leak of tx_ring and tx_cq due to overwriting in mlx4 driver, from Martin KaFai Lau. 3) Need to reference count PHY driver module when it is attached, from Mao Wenan. 4) Don't do zero length vzalloc() in ethtool register dump, from Stanislaw Gruszka. 5) Defer net_disable_timestamp() to a workqueue to get out of locking issues, from Eric Dumazet. 6) We cannot drop the SKB dst when IP options refer to them, fix also from Eric Dumazet. 7) Incorrect packet header offset calculations in ip6_gre, again from Eric Dumazet. 8) Missing tcp_v6_restore_cb() causes use-after-free, from Eric too. 9) tcp_splice_read() can get into an infinite loop with URG, and hey it's from Eric once more. 10) vnet_hdr_sz can change asynchronously, so read it once during decision making in macvtap and tun, from Willem de Bruijn. 11) Can't use kernel stack for DMA transfers in USB networking drivers, from Ben Hutchings. 12) Handle csum errors properly in UDP by calling the proper destructor, from Eric Dumazet. 13) For non-deterministic softirq run when scheduling NAPI from a workqueue in mlx4, from Benjamin Poirier. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits) sctp: check af before verify address in sctp_addr_id2transport sctp: avoid BUG_ON on sctp_wait_for_sndbuf mlx4: Invoke softirqs after napi_reschedule udp: properly cope with csum errors catc: Use heap buffer for memory size test catc: Combine failure cleanup code in catc_probe() rtl8150: Use heap buffers for all register access pegasus: Use heap buffers for all register access macvtap: read vnet_hdr_size once tun: read vnet_hdr_sz once tcp: avoid infinite loop in tcp_splice_read() hns: avoid stack overflow with CONFIG_KASAN ipv6: Fix IPv6 packet loss in scenarios involving roaming + snooping switches ipv6: tcp: add a missing tcp_v6_restore_cb() nl80211: Fix mesh HT operation check mac80211: Fix adding of mesh vendor IEs mac80211: Allocate a sync skcipher explicitly for FILS AEAD mac80211: Fix FILS AEAD protection in Association Request frame ip6_gre: fix ip6gre_err() invalid reads netlabel: out of bound access in cipso_v4_validate() ...
Diffstat (limited to 'tools/perf/pmu-events/arch/x86/haswell/pipeline.json')
0 files changed, 0 insertions, 0 deletions
us variable is set to 0x00000040 and BIT MCI_CMDRESPEND is cleared by writing MMCICLEAR register. Then mmci_cmd_irq() is called. Considering the following conditions: - host->busy_status is 0, - this is a "busy response", - reading again MMCISTATUS register gives 0x1000400, MMCIMASK0 is updated to unmask MCI_ST_BUSYEND bit. Thus, MMCIMASK0 is set to 0x010003FF and host->busy_status is set to wait for busy end completion. Back again in status loop of mmci_irq(), we quickly go through mmci_data_irq() as there are no data in that case. And we finally go through following test at the end of while(status) loop: /* * Don't poll for busy completion in irq context. */ if (host->variant->busy_detect && host->busy_status) status &= ~host->variant->busy_detect_flag; Because status variable is not yet null (is equal to 0x40), we do not leave interrupt context yet but we loop again into while(status) loop. So we run across following steps: a) MMCISTATUS register is read again and this time is equal to 0x01000400. So that following bits are set: - MCI_DATABLOCKEND (= 10) - MCI_ST_CARDBUSY (= 24) Since MMCIMASK0 register is equal to 0x010003FF: b) status variable is set to 0x01000000. c) MCI_ST_CARDBUSY bit is cleared by writing MMCICLEAR register. Then, mmci_cmd_irq() is called one more time. Since host->busy_status is set and that MCI_ST_CARDBUSY is set in status variable, we just return from this function. Back again in mmci_irq(), status variable is set to 0 and we finally leave the while(status) loop. As a result we leave interrupt context, waiting for busy end interrupt event. Now, consider that busy end completion is raised IN BETWEEN steps 3.a) and 3.c). In such a case, we may mistakenly clear busy end interrupt at step 3.c) while it has not yet been processed. This will result in mmc command to wait forever for a busy end completion that will never happen. To fix the problem, this patch implements the following changes: Considering that the mmci seems to be triggering the IRQ on both edges while monitoring DAT0 for busy completion and that same status bit is used to monitor start and end of busy detection, special care must be taken to make sure that both start and end interrupts are always cleared one after the other. 1) Clearing of card busy bit is moved in mmc_cmd_irq() function where unmasking of busy end bit is effectively handled. 2) Just before unmasking busy end event, busy start event is cleared by writing card busy bit in MMCICLEAR register. 3) Finally, once we are no more busy with a command, busy end event is cleared writing again card busy bit in MMCICLEAR register. This patch has been tested with the ST Accordo5 machine, not yet supported upstream but relies on the mmci driver. Signed-off-by: Sarang Mairal <sarang.mairal@garmin.com> Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/usb/gadget/composite.c')