net-next.git - net-next plumbings

diff options

Diffstat (limited to 'include/uapi/video')

0 files changed, 0 insertions, 0 deletions

et.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07sctp: add dst_pending_confirm flagJulian Anastasov2-4/+6 Add new transport flag to allow sockets to confirm neighbour. When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. The flag is propagated from transport to every packet. It is reset when cached dst is reset. Reported-by: YueHaibing <yuehaibing@huawei.com> Fixes: 5110effee8fd ("net: Do delayed neigh confirmation.") Fixes: f2bb4bedf35d ("ipv4: Cache output routes in fib_info nexthops.") Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net: add dst_pending_confirm flag to skbuffJulian Anastasov2-0/+26 Add new skbuff flag to allow protocols to confirm neighbour. When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. Add sock_confirm_neigh() helper to confirm the neighbour and use it for IPv4, IPv6 and VRF before dst_neigh_output. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07sock: add sk_dst_pending_confirm flagJulian Anastasov1-0/+12 Add new sock flag to allow sockets to confirm neighbour. When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. As not all call paths lock the socket use full word for the flag. Add sk_dst_confirm as replacement for dst_confirm when called for received packets. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net: phy: bcm7xxx: Add BCM74371 PHY IDFlorian Fainelli1-0/+1 Add the BCM74371 PHY ID to the list of supported chips. This is a 28nm technology Gigabit PHY SoC. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net: phy: Allow pre-declaration of MDIO devicesFlorian Fainelli3-0/+23 Allow board support code to collect pre-declarations for MDIO devices by registering them with mdiobus_register_board_info(). SPI and I2C buses have a similar feature, we were missing this for MDIO devices, but this is particularly useful for e.g: MDIO-connected switches which need to provide their port layout (often board-specific) to a MDIO Ethernet switch driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net: dsa: Add support for platform dataFlorian Fainelli1-0/+6 Allow drivers to use the new DSA API with platform data. Most of the code in net/dsa/dsa2.c does not rely so much on device_nodes and can get the same information from platform_data instead. We purposely do not support distributed configurations with platform data, so drivers should be providing a pointer to a 'struct dsa_chip_data' structure if they wish to communicate per-port layout. Multiple CPUs port could potentially be supported and dsa_chip_data is extended to receive up to one reference to an upstream network device per port described by a dsa_chip_data structure. dsa_dev_to_net_device() increments the network device's reference count, so we intentionally call dev_put() to be consistent with the DT-enabled path, until we have a generic notifier based solution. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net: dsa: Rename and export dev_to_net_device()Florian Fainelli1-0/+1 In preparation for using this function in net/dsa/dsa2.c, rename the function to make its scope DSA specific, and export it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07net: phy: Add 2000base-x, 2500base-x and rxaui modesAndrew Lunn1-0/+9 The mv88e6390 ports 9 and 10 supports some additional PHY modes. Add these modes to the PHY core so they can be used in the binding. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-07virtio_net: refactor freeze/restore logic into virtnet reset logicJohn Fastabend1-0/+4 For XDP we will need to reset the queues to allow for buffer headroom to be configured. In order to do this we need to essentially run the freeze()/restore() code path. Unfortunately the locking requirements between the freeze/restore and reset paths are different however so we can not simply reuse the code. This patch refactors the code path and adds a reset helper routine. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net: dsa: introduce bridge notifierVivien Didelot1-0/+10 A slave device will now notify the switch fabric once its port is bridged or unbridged, instead of calling directly its switch operations. This code allows propagating cross-chip bridging events in the fabric. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net: dsa: add switch notifierVivien Didelot1-0/+7 Add a notifier block per DSA switch, registered against a notifier head in the switch fabric they belong to. This infrastructure will allow to propagate fabric-wide events such as port bridging, VLAN configuration, etc. If a DSA switch driver cares about cross-chip configuration, such events can be caught. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net-next: treewide use is_vlan_dev() helper function.Parav Pandit1-4/+2 This patch makes use of is_vlan_dev() function instead of flag comparison which is exactly done by is_vlan_dev() helper function. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jon Maxwell <jmaxwell37@gmail.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06net: remove ndo_neigh_{construct, destroy} from stacked devicesIdo Schimmel1-4/+0 In commit 18bfb924f000 ("net: introduce default neigh_construct/destroy ndo calls for L2 upper devices") we added these ndos to stacked devices such as team and bond, so that calls will be propagated to mlxsw. However, previous commit removed the reliance on these ndos and no new users of these ndos have appeared since above mentioned commit. We can therefore safely remove this dead code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-06can: rx-offload: Add support for timestamp based irq offloadingMarc Kleine-Budde1-1/+9 Some CAN controllers don't implement a FIFO in hardware, but fill their mailboxes in a particular order (from lowest to highest or highest to lowest). This makes problems to read the frames in the correct order from the hardware, as new frames might be filled into just read (low) mailboxes. This gets worse, when following new frames are received into not read (higher) mailboxes. On the bright side some these CAN controllers put a timestamp on each received CAN frame. This patch adds support to offload CAN frames in interrupt context, order them by timestamp and then transmitted in a NAPI context. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 2017-02-06can: rx-offload: Add support for HW fifo based irq offloadingDavid Jander1-0/+51 Some CAN controllers have a usable FIFO already but can still benefit from off-loading the CAN controller FIFO. The CAN frames of the FIFO are read and put into a skb queue during interrupt and then transmitted in a NAPI context. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 2017-02-05net: remove __napi_complete()Eric Dumazet1-1/+0 All __napi_complete() callers have been converted to use the more standard napi_complete_done(), we can now remove this NAPI method for good. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-04net: ipv6: Change notifications for multipath add to RTA_MULTIPATHDavid Ahern1-0/+1 Change ip6_route_multipath_add to send one notifciation with the full route encoded with RTA_MULTIPATH instead of a series of individual routes. This is done by adding a skip_notify flag to the nl_info struct. The flag is used to skip sending of the notification in the fib code that actually inserts the route. Once the full route has been added, a notification is generated with all nexthops. ip6_route_multipath_add handles 3 use cases: new routes, route replace, and route append. The multipath notification generated needs to be consistent with the order of the nexthops and it should be consistent with the order in a FIB dump which means the route with the first nexthop needs to be used as the route reference. For the first 2 cases (new and replace), a reference to the route used to send the notification is obtained by saving the first route added. For the append case, the last route added is used to loop back to its first sibling route which is the first nexthop in the multipath route. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-04net: ipv6: Allow shorthand delete of all nexthops in multipath routeDavid Ahern1-1/+3 IPv4 allows multipath routes to be deleted using just the prefix and length. For example: $ ip ro ls vrf red unreachable default metric 8192 1.1.1.0/24 nexthop via 10.100.1.254 dev eth1 weight 1 nexthop via 10.11.200.2 dev eth11.200 weight 1 10.11.200.0/24 dev eth11.200 proto kernel scope link src 10.11.200.3 10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.3 $ ip ro del 1.1.1.0/24 vrf red $ ip ro ls vrf red unreachable default metric 8192 10.11.200.0/24 dev eth11.200 proto kernel scope link src 10.11.200.3 10.100.1.0/24 dev eth1 proto kernel scope link src 10.100.1.3 The same notation does not work with IPv6 because of how multipath routes are implemented for IPv6. For IPv6 only the first nexthop of a multipath route is deleted if the request contains only a prefix and length. This leads to unnecessary complexity in userspace dealing with IPv6 multipath routes. This patch allows all nexthops to be deleted without specifying each one in the delete request. Internally, this is done by walking the sibling list of the route matching the specifications given (prefix, length, metric, protocol, etc). $ ip -6 ro ls vrf red 2001:db8:1::/120 dev eth1 proto kernel metric 256 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium 2001:db8:200::/120 via 2001:db8:1::2 dev eth1 metric 1024 pref medium 2001:db8:200::/120 via 2001:db8:2::2 dev eth2 metric 1024 pref medium ... $ ip -6 ro del vrf red 2001:db8:200::/120 $ ip -6 ro ls vrf red 2001:db8:1::/120 dev eth1 proto kernel metric 256 pref medium 2001:db8:2::/120 dev eth2 proto kernel metric 256 pref medium ... Because IPv6 allows individual nexthops to be deleted without deleting the entire route, the ip6_route_multipath_del and non-multipath code path (ip6_route_del) have to be discriminated so that all nexthops are only deleted for the latter case. This is done by making the existing fc_type in fib6_config a u16 and then adding a new u16 field with fc_delete_all_nh as the first bit. Suggested-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net: remove support for per driver ndo_busy_poll()Eric Dumazet2-5/+0 We added generic support for busy polling in NAPI layer in linux-4.5 No network driver uses ndo_busy_poll() anymore, we can get rid of the pointer in struct net_device_ops, and its use in sk_busy_loop() Saves NETIF_F_BUSY_POLL features bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller11-40/+60 Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, they are: 1) Stash ctinfo 3-bit field into pointer to nf_conntrack object from sk_buff so we only access one single cacheline in the conntrack hotpath. Patchset from Florian Westphal. 2) Don't leak pointer to internal structures when exporting x_tables ruleset back to userspace, from Willem DeBruijn. This includes new helper functions to copy data to userspace such as xt_data_to_user() as well as conversions of our ip_tables, ip6_tables and arp_tables clients to use it. Not surprinsingly, ebtables requires an ad-hoc update. There is also a new field in x_tables extensions to indicate the amount of bytes that we copy to userspace. 3) Add nf_log_all_netns sysctl: This new knob allows you to enable logging via nf_log infrastructure for all existing netnamespaces. Given the effort to provide pernet syslog has been discontinued, let's provide a way to restore logging using netfilter kernel logging facilities in trusted environments. Patch from Michal Kubecek. 4) Validate SCTP checksum from conntrack helper, from Davide Caratti. 5) Merge UDPlite conntrack and NAT helpers into UDP, this was mostly a copy&paste from the original helper, from Florian Westphal. 6) Reset netfilter state when duplicating packets, also from Florian. 7) Remove unnecessary check for broadcast in IPv6 in pkttype match and nft_meta, from Liping Zhang. 8) Add missing code to deal with loopback packets from nft_meta when used by the netdev family, also from Liping. 9) Several cleanups on nf_tables, one to remove unnecessary check from the netlink control plane path to add table, set and stateful objects and code consolidation when unregister chain hooks, from Gao Feng. 10) Fix harmless reference counter underflow in IPVS that, however, results in problems with the introduction of the new refcount_t type, from David Windsor. 11) Enable LIBCRC32C from nf_ct_sctp instead of nf_nat_sctp, from Davide Caratti. 12) Missing documentation on nf_tables uapi header, from Liping Zhang. 13) Use rb_entry() helper in xt_connlimit, from Geliang Tang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03sched: cls_flower: expose priority to offloading netdeviceJiri Pirko1-0/+1 The driver that offloads flower rules needs to know with which priority user inserted the rules. So add this information into offload struct. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03lib: Introduce priority array area managerJiri Pirko1-0/+76 This introduces a infrastructure for management of linear priority areas. Priority order in an array matters, however order of items inside a priority group does not matter. As an initial implementation, L-sort algorithm is used. It is quite trivial. More advanced algorithm called P-sort will be introduced as a follow-up. The infrastructure is prepared for other algos. Alongside this, a testing module is introduced as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03list: introduce list_for_each_entry_from_reverse helperJiri Pirko1-0/+13 Similar to list_for_each_entry_continue and its reverse variant list_for_each_entry_continue_reverse, introduce reverse helper for list_for_each_entry_from. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03trace: rename trace_print_hex_seq arg and add kdocDaniel Borkmann2-3/+3 Steven suggested to improve trace_print_hex_seq() a bit after commit 2acae0d5b0f7 ("trace: add variant without spacing in trace_print_hex_seq") in two ways: i) by adding a kdoc comment for the helper function itself and ii) by renaming 'spacing' argument into 'concatenate' to better denote that we don't add spaces between each hex bytes. Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03bridge: uapi: add per vlan tunnel infoRoopa Prabhu3-0/+13 New nested netlink attribute to associate tunnel info per vlan. This is used by bridge driver to send tunnel metadata to bridge ports in vlan tunnel mode. This patch also adds new per port flag IFLA_BRPORT_VLAN_TUNNEL to enable vlan tunnel mode. off by default. One example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). User can configure per-vlan tunnel information which the bridge driver can use to bridge vlan into the corresponding vn-segment. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03vxlan: support fdb and learning in COLLECT_METADATA modeRoopa Prabhu1-0/+1 Vxlan COLLECT_METADATA mode today solves the per-vni netdev scalability problem in l3 networks. It expects all forwarding information to be present in dst_metadata. This patch series enhances collect metadata mode to include the case where only vni is present in dst_metadata, and the vxlan driver can then use the rest of the forwarding information datbase to make forwarding decisions. There is no change to default COLLECT_METADATA behaviour. These changes only apply to COLLECT_METADATA when used with the bridging use-case with a special dst_metadata tunnel info flag (eg: where vxlan device is part of a bridge). For all this to work, the vxlan driver will need to now support a single fdb table hashed by mac + vni. This series essentially makes this happen. use-case and workflow: vxlan collect metadata device participates in bridging vlan to vn-segments. Bridge driver above the vxlan device, sends the vni corresponding to the vlan in the dst_metadata. vxlan driver will lookup forwarding database with (mac + vni) for the required remote destination information to forward the packet. Changes introduced by this patch: - allow learning and forwarding database state in vxlan netdev in COLLECT_METADATA mode. Current behaviour is not changed by default. tunnel info flag IP_TUNNEL_INFO_BRIDGE is used to support the new bridge friendly mode. - A single fdb table hashed by (mac, vni) to allow fdb entries with multiple vnis in the same fdb table - rx path already has the vni - tx path expects a vni in the packet with dst_metadata - prior to this series, fdb remote_dsts carried remote vni and the vxlan device carrying the fdb table represented the source vni. With the vxlan device now representing multiple vnis, this patch adds a src vni attribute to the fdb entry. The remote vni already uses NDA_VNI attribute. This patch introduces NDA_SRC_VNI netlink attribute to represent the src vni in a multi vni fdb table. iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's. before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metadata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03ip_tunnels: new IP_TUNNEL_INFO_BRIDGE flag for ip_tunnel_info modeRoopa Prabhu1-0/+1 New ip_tunnel_info flag to represent bridged tunnel metadata. Used by bridge driver later in the series to pass per vlan dst metadata to bridge ports. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net/sched: act_ife: Change to use ife moduleYotam Gigi2-10/+1 Use the encode/decode functionality from the ife module instead of using implementation inside the act_ife. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net: Introduce ife encapsulation moduleYotam Gigi3-0/+70 This module is responsible for the ife encapsulation protocol encode/decode logics. That module can: - ife_encode: encode skb and reserve space for the ife meta header - ife_decode: decode skb and extract the meta header size - ife_tlv_meta_encode - encodes one tlv entry into the reserved ife header space. - ife_tlv_meta_decode - decodes one tlv entry from the packet - ife_tlv_meta_next - advance to the next tlv Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03net/sched: act_ife: Unexport ife_tlv_meta_encodeYotam Gigi1-2/+0 As the function ife_tlv_meta_encode is not used by any other module, unexport it and make it static for the act_ife module. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-03tcp: add tcp_mss_clamp() helperEric Dumazet1-0/+9 Small cleanup factorizing code doing the TCP_MAXSEG clamping. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-02net: add LINUX_MIB_PFMEMALLOCDROP counterEric Dumazet1-0/+1 Debugging issues caused by pfmemalloc is often tedious. Add a new SNMP counter to more easily diagnose these problems. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Josef Bacik <jbacik@fb.com> Acked-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-02net: phy: marvell: Add support for 88e1545 PHYAndrew Lunn1-0/+1 The 88e1545 PHYs are discrete Marvell PHYs, found in a quad package on the zii-devel-b board. Add support for it to the Marvell PHY driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-02unix: add ioctl to open a unix socket file with O_PATHAndrey Vagin1-0/+2 This ioctl opens a file to which a socket is bound and returns a file descriptor. The caller has to have CAP_NET_ADMIN in the socket network namespace. Currently it is impossible to get a path and a mount point for a socket file. socket_diag reports address, device ID and inode number for unix sockets. An address can contain a relative path or a file may be moved somewhere. And these properties say nothing about a mount namespace and a mount point of a socket file. With the introduced ioctl, we can get a path by reading /proc/self/fd/X and get mnt_id from /proc/self/fdinfo/X. In CRIU we are going to use this ioctl to dump and restore unix socket. Here is an example how it can be used: $ strace -e socket,bind,ioctl ./test /tmp/test_sock socket(AF_UNIX, SOCK_STREAM, 0) = 3 bind(3, {sa_family=AF_UNIX, sun_path="test_sock"}, 11) = 0 ioctl(3, SIOCUNIXFILE, 0) = 4 ^Z $ ss -a | grep test_sock u_str LISTEN 0 1 test_sock 17798 * 0 $ ls -l /proc/760/fd/{3,4} lrwx------ 1 root root 64 Feb 1 09:41 3 -> 'socket:[17798]' l--------- 1 root root 64 Feb 1 09:41 4 -> /tmp/test_sock $ cat /proc/760/fdinfo/4 pos: 0 flags: 012000000 mnt_id: 40 $ cat /proc/self/mountinfo | grep "^40\s" 40 19 0:37 / /tmp rw shared:23 - tmpfs tmpfs rw Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-02net: phy: Marvell: Add mv88e6390 internal PHYAndrew Lunn1-0/+6 The mv88e6390 Ethernet switch has internal PHYs. These PHYs don't have an model ID in the ID2 register. So the MDIO driver in the switch intercepts reads to this register, and returns the switch family ID. Extend the Marvell PHY driver by including this ID, and treat the PHY as a 88E1540. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller9-30/+40 All merge conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-02netfilter: allow logging from non-init namespacesMichal Kubeček1-0/+3 Commit 69b34fb996b2 ("netfilter: xt_LOG: add net namespace support for xt_LOG") disabled logging packets using the LOG target from non-init namespaces. The motivation was to prevent containers from flooding kernel log of the host. The plan was to keep it that way until syslog namespace implementation allows containers to log in a safe way. However, the work on syslog namespace seems to have hit a dead end somewhere in 2013 and there are users who want to use xt_LOG in all network namespaces. This patch allows to do so by setting /proc/sys/net/netfilter/nf_log_all_netns to a nonzero value. This sysctl is only accessible from init_net so that one cannot switch the behaviour from inside a container. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02ipvs: free ip_vs_dest structs when refcnt=0David Windsor1-1/+1 Currently, the ip_vs_dest cache frees ip_vs_dest objects when their reference count becomes < 0. Aside from not being semantically sound, this is problematic for the new type refcount_t, which will be introduced shortly in a separate patch. refcount_t is the new kernel type for holding reference counts, and provides overflow protection and a constrained interface relative to atomic_t (the type currently being used for kernel reference counts). Per Julian Anastasov: "The problem is that dest_trash currently holds deleted dests (unlinked from RCU lists) with refcnt=0." Changing dest_trash to hold dest with refcnt=1 will allow us to free ip_vs_dest structs when their refcnt=0, in ip_vs_dest_put_and_free(). Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02netfilter: merge ctinfo into nfct pointer storage areaFlorian Westphal2-17/+15 After this change conntrack operations (lookup, creation, matching from ruleset) only access one instead of two sk_buff cache lines. This works for normal conntracks because those are allocated from a slab that guarantees hw cacheline or 8byte alignment (whatever is larger) so the 3 bits needed for ctinfo won't overlap with nf_conn addresses. Template allocation now does manual address alignment (see previous change) on arches that don't have sufficent kmalloc min alignment. Some spots intentionally use skb->_nfct instead of skb_nfct() helpers, this is to avoid undoing the skb_nfct() use when we remove untracked conntrack object in the future. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02netfilter: guarantee 8 byte minalign for template addressesFlorian Westphal1-0/+2 The next change will merge skb->nfct pointer and skb->nfctinfo status bits into single skb->_nfct (unsigned long) area. For this to work nf_conn addresses must always be aligned at least on an 8 byte boundary since we will need the lower 3bits to store nfctinfo. Conntrack templates are allocated via kmalloc. kbuild test robot reported BUILD_BUG_ON failed: NFCT_INFOMASK >= ARCH_KMALLOC_MINALIGN on v1 of this patchset, so not all platforms meet this requirement. Do manual alignment if needed, the alignment offset is stored in the nf_conn entry protocol area. This works because templates are not handed off to L4 protocol trackers. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02netfilter: add and use nf_ct_set helperFlorian Westphal2-2/+9 Add a helper to assign a nf_conn entry and the ctinfo bits to an sk_buff. This avoids changing code in followup patch that merges skb->nfct and skb->nfctinfo into skb->_nfct. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02skbuff: add and use skb_nfct helperFlorian Westphal2-4/+11 Followup patch renames skb->nfct and changes its type so add a helper to avoid intrusive rename change later. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02netfilter: reduce direct skb->nfct usageFlorian Westphal1-3/+6 Next patch makes direct skb->nfct access illegal, reduce noise in next patch by using accessors we already have. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 2017-02-02netfilter: conntrack: no need to pass ctinfo to error handlerFlorian Westphal1-1/+1 It is never accessed for reading and the only places that write to it are the icmp(6) handlers, which also set skb->nfct (and skb->nfctinfo). The conntrack core specifically checks for attached skb->nfct after ->error() invocation and returns early in this case. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>


context:
space:
mode: