1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
|
Qualcomm adreno/snapdragon MDP4 display controller
Description:
This is the bindings documentation for the MDP4 display controller found in
SoCs like MSM8960, APQ8064 and MSM8660.
Required properties:
- compatible:
* "qcom,mdp4" - mdp4
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt signal from the display controller.
- clocks: device clocks
See ../clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required.
* "core_clk"
* "iface_clk"
* "bus_clk"
* "lut_clk"
* "hdmi_clk"
* "tv_clk"
- ports: contains the list of output ports from MDP. These connect to interfaces
that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
special case since it is a part of the MDP block itself).
Each output port contains an endpoint that describes how it is connected to an
external interface. These are described by the standard properties documented
here:
Documentation/devicetree/bindings/graph.txt
Documentation/devicetree/bindings/media/video-interfaces.txt
The output port mappings are:
Port 0 -> LCDC/LVDS
Port 1 -> DSI1 Cmd/Video
Port 2 -> DSI2 Cmd/Video
Port 3 -> DTV
Optional properties:
- clock-names: the following clocks are optional:
* "lut_clk"
Example:
/ {
...
hdmi: hdmi@4a00000 {
...
ports {
...
port@0 {
reg = <0>;
hdmi_in: endpoint {
remote-endpoint = <&mdp_dtv_out>;
};
};
...
};
...
};
...
mdp: mdp@5100000 {
compatible = "qcom,mdp4";
reg = <0x05100000 0xf0000>;
interrupts = <GIC_SPI 75 0>;
clock-names =
"core_clk",
"iface_clk",
"lut_clk",
"hdmi_clk",
"tv_clk";
clocks =
<&mmcc MDP_CLK>,
<&mmcc MDP_AHB_CLK>,
<&mmcc MDP_AXI_CLK>,
<&mmcc MDP_LUT_CLK>,
<&mmcc HDMI_TV_CLK>,
<&mmcc MDP_TV_CLK>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdp_lvds_out: endpoint {
};
};
port@1 {
reg = <1>;
mdp_dsi1_out: endpoint {
};
};
port@2 {
reg = <2>;
mdp_dsi2_out: endpoint {
};
};
port@3 {
reg = <3>;
mdp_dtv_out: endpoint {
remote-endpoint = <&hdmi_in>;
};
};
};
};
};
|
