| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Support dissecting IPv6 headers into the îp6' trafgen protocol header
command.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Added trafgen_dump.c module which dumps headers from packet
in .cfg format. Packet is dumped if -o <file>.cfg was specified,
it might be useful to specify *.pcap file as input and convert it
into .cfg file to edit proto fields in human readable format.
To make it possible several main changes were added:
1) packet id is embedded into struct packet.id, and
it is updated on each realloc_packet()
2) Added new struct proto_hdr.get_next_proto callback
to make possible apply fields of next header.
3) Added new dev_io ops for writting packets into .cfg file,
to re-use common dev_io mechsnism for packets dumping.
Before dump the default ETH_PROTO fields are applied as first header and
then next proto_hdr is identified via .get_next_proto(...) callback.
Meanwhile only eth, arp, vlan, ip4, udp, & tcp protos can be dissected
into *.cfg format.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Replace using current_packet() by new proto_hdr_packet(hdr)
function to obtain packet directly from header. This is more
generic and flexible way, because it guarantees that packet really
belongs to the header, which in case in current_packet() is not right
because it means getting of last allocated packet.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Add trafgen_dev.c module which provides generic way of
reading and writing packets to/from networking device or a pcap file.
Also allow to handle output pcap file via '-o, --out, --dev' option.
It might be useful in future for testing some link protocols which is
not easy to capture (e.g. wlan packets) w/o having some special setup.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[tklauser: fix whitespace issues]
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
tun interface does not have Ethernet header so lets push Ethernet
header only if device supports this.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
While fixing the issue with getting of IPv4 address from device,
the setting of default src IPv4/IPv6 addresses was moved from
hdr->header_init(...) callback to hdr->packet_finish(...), but
packet_finish(...) is called in the following order:
udp_hdr->packet_finish() - UDP csum calculation over IPv4/6 pseudo header
ip4_hdr->packet_finish() - setting default src IPv4 address from dev
...
So src IPv4/6 address will be set after UDP/TCP csum calculation which
is wrong, so fixed issue by moving it to the hdr->header_init(...) stage
as it was before the c4e07d5142c8.
Fixes: c4e07d5142c8 ("trafgen: l3: Support interface without IP address")
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Rename all proto_field_xxx(...) functions to proto_hdr_field(...).
It is good for 2 reasons:
1) proto_hdr_field_xxx naming is more consistent as
it is related to proto_hdr API.
2) It makes possible to introduce proto_field_xxx API
which will operate only with struct proto_field.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Move default source address setting to packet_finish so that we do not
need to get the device's address if the source address is set in the
packet. Without this, trafgen does not work with an interface without
address configured. In addition, in the case failing to get the address
for an interface, intead of panic, it now prints a warning and uses a
value of 0.0.0.0.
Signed-off-by: Ken Wu <abawwu@gmail.com>
Reviewed-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Update TCP checksum field if any TCP of fields was changed. Use same
checksum update function on 'packet_finish' and 'header update'.
Set 'is_csum_valid = false' if lower IPv4/IPv6 pseudo header was changed.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Update UDP csum field at runtime if:
1) UDP field was changed.
2) IPv4/6 source/destination addresses were changed (which is a part
of UDP pseudo header), this is handled by IPv4/6 protocols.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Handle 'field_changed' callback to check if IPv4 csum is needed to be
recalculated, if so - update it on 'packet_update' event.
Added 'is_csum_valid' to proto_hdr struct to check if csum needs to be
updated.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Currently struct proto_hdr is used twofold:
1) Statically define protocol behavior, i.e. all the *_hdr definitions in
trafgen_l{2,3,4}.c which map a protocol id/layer to a set of callback
functions.
2) For each packet created at parse time the struct is memcpy()'ed
(including all the static information from 1) and then used to store
dynamic information at parse/run time.
Thus, struct proto_hdr members such as the proto id, layer and the
pointers callback functions get copied for each created packet (in
addition to the other fields which get changed during parsing). Also,
static/dynamic information get mixed and we e.g. can't make the protocol
definitions const to ensure they'll not get changed by mistake.
Rather than copying the struct proto_hdr for every packet, clearly
separate the two purposes defined above by splitting struct proto_hdr
into two structs:
1) struct proto_ops for the static (const) protocol behavior definition
2) struct proto_hdr (reduced) for dynamic information
struct proto_hdr keeps a pointer to the corresponding proto_ops instance
and uses it to execute the corresponding callbacks.
Reference: https://groups.google.com/forum/#!msg/netsniff-ng/20RvwJdh50Y/eMkbmKSaBgAJ
Acked-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Follow common coding style and use:
switch (...)
instead of:
switch(...)
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
It is potentially dangerous to use the user specified IHL field for
csum calculation, as it might lead to read buffer overflows.
Instead introduce and use the len field in struct proto_hdr which is
calculated automatically after the header is built.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[tk: reword commit message]
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Set default ip proto field to IPPROTO_IPV6(41) if the higher protocol
was specified as ipv6().
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Support for generating ICMPv4 headers using the 'icmp4()/icmpv4()'
trafgen generation functions.
Fields supported:
type Set type field (default 0: Echo reply)
Supported keywords: echorequest, echoreply
code Set code field (default 0)
csum Set checksum field (calculated by default)
mtu Set mtu field for destination unreachable (default 0)
seq Set sequence field (default 0)
id Set identifier field (default 0)
addr Set redirect address (default 0.0.0.0)
Example (send ping request):
{ icmpv4(echorequest, seq=1, id=1326) }
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[tk: squash commits, consistency between functionality and docu]
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Support for generating simple ICMPv6 headers using the 'icmp6()/icmpv6()'
trafgen generation function.
Fields supported:
mtype Message type (default: 0)
Supported keywords: echorequest, echoreply
code Code (default: 0)
csum Message checksum (calculated by default)
Examples:
{ eth(), ipv6(daddr=::1), icmpv6(echorequest), 42, 42, 0, 0 }'
If not explicitely specified, the lower header is initialized as Ethernet.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Support for generating simple IPv6 headers using the 'ip6()/ipv6()'
trafgen generation function.
Fields supported:
ver|version Version (default: 6)
tc|tclass Traffic class (default: 0)
fl|flow Flow Label (default: 0)
len|length Payload length (calculated by default)
nh|nexthdr Type of next header (default: 0)
hl|hoplimit|ttl Hop Limit, TTL (default: 0)
sa|saddr Source IPv6 address (default: device address)
da|daddr Destination IPv6 address (default: 0:0:0:0:0:0:0:0)
Examples:
{ eth(), ipv6(daddr=1:2:3:4:5:6:7:8) }
{ ipv6(tc=2, hl=3, daddr=::1) }
{ eth(), ipv6(nh=58, sa=2001:db8::, da=::1), 128, 0, 0x52, 0x03, 0, 0, 0, 0 }
If not explicitely specified, the lower header is initialized as Ethernet.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
In some cases we use panic() in situations where the error could only
happen due to an implementation error. Use bug() there as it is more
applicable, as panic() is mainly used to report system call errors.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Move setting lower protocol id field value from UDP & TCP
protocols to IPv4 only, so lower layer will know exactly value
to set in protocol id field.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Move setting next protocol id field from higher protocols (ARP, IPv4)
to Ethernet. It makes code little more generic w/o checking each lower
protocol and setting specific field id.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Add set_next_proto callback to proto_hdr struct to allow lower
protocol set next protocol id by enum proto_id.
Extended proto_lower_default_add(...) function to take upper protocol
to delegate it's id to lower protocol to set next protocol field.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Change proto_header_init(...) and proto_lower_default_add(...)
functions to return struct proto_hdr * to do not call
proto_current_header(...) after, so it makes more sense to get struct
proto_hdr * right after initializing protocol by id.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
The IEEE 802.3 standard commonly refers to the field specifying the
upper layer protocol as Ethertype, not protocol. Thus, also support the
keywords "etype" and "type" for this field.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Add L3 module for implement L3 layer protocols generation.
Implemented setting of IPv4 header with all fields except options.
By default IPv4 address of output device is used as src ip address.
On finish (after packet is specified) - total len & checksum are calculated.
Meanwhile Ethernet protocol is initialized as default lower header.
If the lower protocol is IPv4 then IPv4 protocol id is set
to IP-in-IP in lower protocol header.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
